Para o conteúdo da página

Bass Drum O's 5" Black round HBL5

249 Avaliações de clientes

4.6 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

115 Críticas

Bass Drum O's 5" Black round HBL5
€ 15,90
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1
google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MV
O ohw ;)
Michiel Vetters 16.04.2020
If you cut a hole in your bass drum head, use this!! It saved my head a few times already. A few years back I didn't see the use of this and I ended up with a torn bass drum head due to a kick mic falling over.
This is an easy to install solution in combination with the Bass Drum O's Cutter.

Better safe then sorry!!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
N
Maybe I'm to blame?
Nonsensei 30.04.2025
This might be my own stupidity, but I wasn't able to get the backside ring to stick. My kick drum reso has a dampening ring. I cut the hole so that the edge of the hole is right next to the edge of the dampening ring. When I went to install this O-ring, the part that's supposed to go on the inside of the kick didn't go in place no matter how hard I tried. Because it didn't go where it should have, it remained kind of halfway installed, which in return resulted in a very noticeable buzzing or rattling sound.

Can't be sure if I just messed up or if the ring in question was faulty, but results were not great in any case. However, it seems that you can get away with just the outside ring in place. At least it hasn't fallen of in the month that I've had it.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
EJ
Does exactly what it's supposed to do
Ed Jay 17.03.2022
Protects your port from ripping if there are any rough edges on your port cut. Gives a smooth edge and finishes of the look nicely.

Note: back mounting ring tends to pop off inside the shell but should not interfere with the stability of the O
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
t
Plain plastic ring
trickius 28.05.2020
You need to apply pressure with a tool not your hands! I did it first with my hands and it nearly came off after all the movement of the bass head. Just to be on the safe side the second time i applied some glue and i pushed with a screwdriver. Rock solid ever since.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
e
Works well
eamesy 11.05.2017
Easy to fit but be careful cutting your hole to make it a fraction bigger as mentioned on here before... It did take a bit of physical effort to make the two side s "click" together so make sure you do this properly otherwise will pop out one day!
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
j
Solid
jmaffei 30.07.2023
Does the job, a little fiddly to attach but worth it as it stays very secure. Some O rings are just an adhesive for the front side of the rest head but this one clips on both sides, which I prefer.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
very handy tool for bass drum sound enhancement
Anónimo 12.01.2017
Very easy to install - enhances the sound of the bass drum thanks to more bass projection - I deliberately bought the 5 inch version because the bigger size compared to the 4 inch allows to put your hand into the bass drum to position whatever you use to muffle.
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Kick drum 5" plastic ring
Andrew5013 17.04.2016
Ring supplied with adhesive pads to hold both sides together.

Be sure to make hole 2-3mm larger - leaves room for 2 parts to click together easily.

Has improved the tone of the kick drum (less flap)

Plus, reduces the chance of tearing the front skin - always a risk when hitting it enthusiastically!!
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Q
Super handy
Quadrone 05.05.2025
Super handy to use, looks great and reinforces the head for mics going in and out
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
R
Does what it has to do
Reinoud 31.05.2017
I've been using these for over then years now. Installing them can be a little tricky, but once installed you never have to worry about it again. An absolute must if you want a mic in your kick.
0
0
Reportar a crítica

Reportar a crítica

Bass Drum O's 5" Black round HBL5