oma-with-cookies

Servido com amor!

Com os nossos cookies, queremos providenciar-lhe uma experiência de compra agradável com tudo o que isso implica. Isto inclui, por exemplo, ofertas adequadas, anúncios personalizados e a memorização de configurações. Se estiver de acordo, concorde com o uso de cookies para preferências, estatísticas e marketing, clicando simplesmente em ‘Tudo bem’ (mostrar todos).
Você pode revogar o seu consentimento a qualquer momento através das configurações de cookies (aqui)
Informação legal · Avisos de proteção dos dados
Para o conteúdo da página

Göldo Screws for Bass Pickups SB

128 Avaliações de clientes

5 97 Clientes 4 16 Clientes 3 5 Clientes 2 4 Clientes 1 6 Clientes
4.5 / 5
Avaliar agora

acabamento

Diretrizes de apreciações

51 Críticas

Göldo Screws for Bass Pickups SB
€ 2,90
Todos os preços incl. IVA
Disponível em 5-7 semanas
1
google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
DB
Two nice sets of screws but ...
Dr Bassman 16.12.2019
A while back, I bought a Harley Benton B-450 QTB bass from Thomann. It's an amazing instrument but unfortunately it lost one of the fixing screws for its neck pickup. I later found out that this is a reasonably common problem because these screws are not always tightened properly during manufacture. Hence, they have a tendency to fall out.

Anyhow, to cut a very long story short, Thomann kindly sent me two packets of these screws in order that I might rectify the problem with my bass. Don't get me wrong, they are nice enough screws (so 5 stars for quality) BUT they are too long for my B-450 QTB; which is only one star overall i.e.. they are of little use to me.

Seriously, sometimes I just want to scweam and scweam and scweam and scweam ...
acabamento
1
1
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Works fine, good quality.
TrEr 09.06.2020
I got these because according to the specs they were slightly longer than most standard pickup screws. I have a bass with slightly deeper routing than normal and none of the spare screws I had were long enough to adjust the pickups correctly.

These screws did the trick. They're only 2-3 mm longer but it was enough to get the pickups where I wanted them.

Quality wise they're perfectly fine. Nothing exceptional, they're simply good quality screws.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
WB
Carpenters choice.
Woodwork Barn 17.10.2017
The Screws were used in an experimental P Bass which I made from Oak! (being a carpenter, I get a lot of good quality off-cuts). When new, being decent quality, the screws drove into the hard wood perfectly. However, about a month later when I came to adjust the height of my pick-ups, two of the screws refused to budge and I ended up rounding the heads off. This was through no fault of the screws but was due to the high tannin content in Oak which can eat steel. As a carpenter I should have realised this earlier. I managed to remove them cleanly with pliers in the end!

In summary;
Good quality screws, perfect for use in normal tone woods, will be buying more very very soon but oiling them well before they go back in!
Oak.... Excellent tone wood, but a bit heavy and likes to eat steel! :)
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Perfect for Bartollini pickups
Anónimo 15.09.2016
just what I needed, perfect replacement for Bartollini pickups screws
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Screws for Bass pickup
SouledOut 09.05.2022
Ordered these to replace the screws on a fender P bass but these are longer and a tiny bit smaller that the stock fender P bass pickup screws.
Just keep in mind to order the correct size for your pickup.

It's too soon to tell if the quality is good.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JK
Value for money
James K. 01.05.2013
I bought these to replace screws in EMG jazz pickups which had oxidised over the years (the black screws now had white powdery oxidation on the heads), these are a perfect replacement same length same thickness and same thread, the bass now looks good as new and they fit perfectly!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
B
Work perfectly
BruceB 17.06.2024
I needed to reposition the pickups on a restoration project, and these slightly longer than OEM screws worked perfectly with some foam to relocate the pickups at the perfect distance from the strings when I set up the guitar. Recommended.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Good quality screws
Anónimo 09.09.2014
The finish is nice and they're long enough for most instruments. The heads are pretty sturdy but don't get too excited with your screwdriver or you'll end up ruining them.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Mostrar tradução
Mostrar original
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Good
Anónimo 19.09.2016
No problems with them yet. Had for almost a year, no rust.
acabamento
0
0
Reportar a crítica

Reportar a crítica

Göldo Screws for Bass Pickups SB