Interfaces e Nodos

Enttec DMX USB Pro Interface

403

512 DMX channels (1 universe) either as input or output
Fully compliant with USITT DMX512-A
Output refresh rate configurable from 1 to 40 FPS

Showtec NET-2/3 Pocket

104

Network: RJ45
DMX 2 x XLR 3-pin
Supported protocols: ArtNET, sACN, TCP/IPv4, RDM, DMX-512A

Sunlite SUSHI-Z1 USB-DMX Interface

77

Equipped with SUT (Smart Upgrade Tech) technology, which means that the 128 ...
Can be used as a DMX controller or as a 3D visualiser
128 DMX channels with software/app use (expandable to 512)

Botex NETcon 8-3

30

Configuration via the built-in display on the device itself or conveniently via a web interface in your browser
RDM-compatible: DMX512-A
Adjustable DMX frame rate: 1 / 10 / 30 / 44 Hz

ChamSys MagicQ Magic DMX Full Dongle

45

For the output of a single DMX universe
Onboard processor for DMX data transmission
MagicDMX can be operated with MagicQ under Windows, Mac and Linux

MA Lighting grandMA3 onPC 2Port Node 2k P

3

PoE variant (power over ethernet)
In combination with grandMA3 onPC, it unlocks 2,048 parameters and provides two frame-synchronised DMX outputs
Perfect addition to a grandMA3 onPC command wing, expanding the number of usable parameters to 4,096

Enttec DMX USB Pro Interface Bundle

512 DMX channels (1 universe) either as input or output
Fully compliant with USITT DMX512-A
Output refresh rate configurable from 1 to 40 FPS

MA Lighting grandMA3 onPC DMX Key

Powerful solution for smaller venues, clubs, theatres or television studios
Real-time control of 4,096 parameters in combination with grandMA3 onPC software
Use of grandMA3 onPC software for DMX control, without prior knowledge of setup, configuration or network technology

Showtec NET-2/5 Pocket

64

Network: RJ45
DMX 2 x XLR 5-pin
Supported protocols: ArtNET, sACN, TCP/IPv4, RDM, DMX-512A

Enttec Open DMX USB Interface

454

DMX USB interface is an inexpensive and popular solution for converting a DMX signal via USB
Functions with many different DMX software solutions based on Windows
GPL License

MA Lighting grandMA3 onPC DMX-key starter

1

Real-time control of 1,024 parameters in combination with grandMA3 onPC software
Operate DMX lighting using grandMA3 onPC software — no prior knowledge of setup, configuration, or networking required
2 DMX outputs

Botex NETcon 8-5

19

Configuration via the built-in OLED display directly on the device or conveniently ...
RDM-compatible: DMX512-A
Adjustable DMX frame rate: 1 / 10 / 30 / 44 Hz

Obsidian Netron EN12

5

Various routing and merging options
Predefined quick-start profiles (IP address ranges etc.)
Individually configurable user profiles

Eurolite DXT PoE Art-Net Node I

7

etherCON network socket with PoE
Power supply via 48V PoE switch/PoE injector (802.3af) or 5V USB-C port
Input and output of up to 512 DMX channels

Obsidian Netron EN4

1

Various routing and merging options
Predefined quick-start profiles (IP address ranges etc.)
Freely configurable user profiles

Avolites T1 USB Interface

15

The software is show-compatible with all Titan consoles, but only one universe can be output via DMX or Art-Net
All controls are available on the program interface
Connecting external controls is not intended

ChamSys GeNetix GN5 5 Port Node

3

5 RDM Direct DMX connections
2 Network connections
2 MIDI connections (1 input, 1 output)

Enttec ODE Mk3

7

Two universal bi-directional DMX / E1.20 RDM sockets XLR5
PoE (Power over Ethernet) RJ45 port supports IEEE 802.3af (10/100 Mbps) and an optional DC 12-24v power input
Secure 'EtherCon' connections

Enttec Open DMX USB Interface Bundle

DMX USB interface is an inexpensive and popular solution for converting a DMX signal via USB
Functions with many different DMX software solutions based on Windows
GPL License

MA Lighting grandMA3 onPC 4Port Node 4k P

Unlocks 4,096 parameters in conjunction with grandMA3 onPC and provides four frame-synchronised DMX outputs
The 8"/1U housing provides an optimal size for touring and fixed installations
Dimensions: (W x D x H): 207 x 184 x 43 mm

Enttec DIN Ethergate Mk2

1

Two bidirectional DMX connections for standard DMX512-A with E1.20 RDM support
Overdrive mode outputs with a higher data transfer rate of 500 Kbit/s ...
Expandable network with dual Ethernet ports for daisy-chain connections

ETC Gadget II

3

4267A1004
For two universes from USB to 2x XLR
Can be connected via USB to any computer

Showtec NET-8/3

8

Network router that can convert artnet to DMX-512 signals and vice versa
A maximum of 4096 channels can be transmitted using a single CAT5 cable
Embedded network switch enabling it to be used as a ethernet repeater

Eurolite USB-DMX512 PRO Interface MK2

65

Suitable for a variety of DMX software applications
Fully supported by FreeStyler, DMXControl and PC_DIMMER
Output of up to 512 DMX channels

MA Lighting grandMA3 onPC 8Port Node 4k Po

Unlocks 4,096 parameters in conjunction with grandMA3 onPC and provides eight DMX outputs
Parameter: 4,096 (HTP/LTP)
Parameter Mode2: 2,048 (HTP/LTP)

Eurolite USB-DMX512 PRO Cable Interface

22

Extremely compact professional USB DMX interface
Microelectronic circuit is placed in the XLR plug
For controlling DMX devices with a computer (software not included)

ADJ NET 8

2

8-Port for ArtNet, sACN
DMX and RDM protocols
DHCP or static IP address

Avolites T2 USB Interface

6

For outputting 2 DMX universes
Includes SMPTE timecode input and USB MIDI control
The software is show-compatible with all Titan consoles, 2 universes are output via DMX or Art-Net

Showtec NET-8/5

9

Network router that can convert artnet to DMX-512 signals and vice versa
A maximum of 4096 channels can be transmitted using a single CAT5 cable
Embedded network switch enabling it to be used as a ethernet repeater

Swisson XND-8R5 ENode 19" 8 Port 5-pol

Converts Art-Net and sACN to DMX for up to 8 independent universes
Art-Net I, II and 3 (DMX and RDM)
sACN release- and draft version

ChamSys GeNetix GN10 10 Port Node

1

10 RDM DMX ports for input and output
Supports Art-Net & sACN
LTC and MIDI timecode via Ethernet

Obsidian Netron EP4

Four freely configurable DMX outputs
Full RDM support (DMX 512-A [RDM])
Various routing and merging options

Obsidian NX DMX

7

Can be used with Onyx for PC software, all Obsidian series consoles and LightJockey
Enables bidirectional RDM communication, with which the settings or addresses of the ...
Unlocks two universes for the Onyx for PC Free Edition

Obsidian Netron RDM10

Two to ten DMX splitter with flexible routing and 2-port Ethernet node with full RDM support
Features two DMX inputs that can be flexibly routed to one or more of the ten optically isolated DMX outputs
Colour-coded LEDs for each input and output clearly indicate the corresponding assignment

Eurolite USB-DMX512-Interface/Update-Ad

57

Allows control of DMX devices with a computer
Suitable for a variety of DMX software applications such as FreeStyler, DMXControl and PC_DIMMER
Output of up to 512 DMX channels

Enttec Storm 10

Supports Art-Net, sACN and ESP Ethernet protocols
1x RJ45 Ethernet input port (10/100 Mbit/s) with integrated LED network status indicator
12 x DMX/RDM output ports in total: 10x rear DMX/RDM ports and ...

ChamSys GeNetix GN2 2 Port Node

2 RDM DMX ports for input and output
Supports Art-Net & sACN
Web server for remote configuration

LightShark LS-1 Node4

5

Fully compatible with LightShark consoles
Single mode mode: RDM / DMX to ArtNet / sACN transceiver
Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or ...

Swisson XND-4B5 Ethernet Node (Box)

For up to 4 independent universes
Art-Net I, II and 3 (DMX and RDM)
sACN Release and Draft-Version

ChamSys GeNetix GN4IP

Robust 4-port Ethernet-to-DMX node in an IP65 housing
Can be used as an Ethernet node with any console that supports Art-net/sACN
Switches MagicQ to core mode via the network (up to 2 MagicQ instances)

ChamSys GeNetix GN10 10R Port Node

With Ethernet RJ45 connections (R variant)
10 RDM DMX ports for input and output
Supports Art-Net & sACN

Swisson XND-8R3 ENode 19" 8 Port 3-pol

Art-Net I, >II and 3 (DMX and RDM)
sACN release and draft version
Up to 8 individually optically isolated DMX outputs

LightShark LS-1 Node1

Fully compatible with the LightShark consoles
Single mode mode: RDM / DMX to ArtNet / sACN transceiver
Merger mode: where the LS-Nodes can receive different universes (via ArtNet/sACN or ...

Obsidian Netron EN6 IP

IP protection rating: IP65
RDM, Artnet and sACN support
Activates the ONYX NOVA 4 Universe licence

Obsidian Netron EN12I

Various routing and merging options
Predefined quick-start profiles (IP address ranges etc.)
Freely configurable user profiles

ETC 4-Port Gateway - 4 RJ45

Distributes DMX and RDM data to each input/output device via Ethernet
Supports Net3 protocol with power supply by ACN
Configurable DMX/RDM output or input

ChamSys MagicQ Magic DMX Full B-Stock

For the output of a single DMX universe
Onboard processor for DMX data transmission
MagicDMX can be operated with MagicQ under Windows, Mac and Linux

Eurolite USB-DMX512-Interface/U B-Stock

Allows control of DMX devices with a computer
Suitable for a variety of DMX software applications such as FreeStyler, DMXControl and PC_DIMMER
Output of up to 512 DMX channels

ChamSys GeNetix TouchScene Mini

For remote activation of scenes from MagicQ, QuickQ and Genetix Node systems
Display size: 4"
Offers seamless integration with MagicQ, QuickQ and GeNetix Node systems for remote control of scenes

ChamSys GeNetix GN10 10P Port Node

With Phoenix screw terminals (P variant)
10 RDM DMX ports for input and output
Supports Art-Net & sACN

Servido com amor!