Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
k
Should have bought this a long time ago
This quick-release adapter is a simple design, but a great idea.
I play among others in a cover band where we have to set up all our own gear: instruments and amps, PA and microphones. Having the quick release adapter installed makes for easy and super-fast setup and breakdown time.
Also, having the adapter mounted on top of my K&M-stand and the microphone and mount neatly tucked away together, makes sure there is no damage during transport.
A good, practical idea if you ask me.
I play among others in a cover band where we have to set up all our own gear: instruments and amps, PA and microphones. Having the quick release adapter installed makes for easy and super-fast setup and breakdown time.
Also, having the adapter mounted on top of my K&M-stand and the microphone and mount neatly tucked away together, makes sure there is no damage during transport.
A good, practical idea if you ask me.
1
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
n
Perfect!
Is really small, no play, it is light but sturdy, can be rotated in 6 angles and released with one hand!!
2
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
R
Not very happy with this
This product is not cheap considering you'll have one for each mic stand.
For quickly changing microphones in a very dynamic field such as the once I'm working for it's an invaluable tool BUT it shakes a lot, the microphone inserted becomes dead unstable, that's not ok. I've had to fit electrical tape all around to have the screws fit properly then once you do it with tape it's hard to get the system working, I've had to remove the system from my working rig unfortunately, it would have been a brilliant idea if it worked.
For quickly changing microphones in a very dynamic field such as the once I'm working for it's an invaluable tool BUT it shakes a lot, the microphone inserted becomes dead unstable, that's not ok. I've had to fit electrical tape all around to have the screws fit properly then once you do it with tape it's hard to get the system working, I've had to remove the system from my working rig unfortunately, it would have been a brilliant idea if it worked.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
k
Works…
…better than expected. Nice to have two microphone “attachments”. Especially when working with a boompole, with “flexible” microphone use.
3
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Quick Release
I don't know about other Quick-Release adapters but this one is a good one. Strong and stable. After I bought one, already bought few more. Can't stop using them, One small thing, everything is solid but it comes with plastic 3/8" adapter. It could come with metal one. Plastic one is ok, but metal would give it indestructable look.
1
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
CM
Solid
Solidly built, does what it's supposed to do.
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Sturdy
Very solid construction is necessary and sufficient!
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
/
Great for antennas
Was sent free with an order, I put it on my antennas to use with super clamps and they are absolutely solid. No more trying to tighten a clamp with an antenna hanging off of it
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
E
Works better than I expected.
Very good quality, 2 seconds to change mic. How did i live without them..))
0
0
Reportar a crítica
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
Not really trustworthy
I have about 35% trust in these and i would never mount a mic upside down using this and neither should you. Ever.
Otherwise.. good?
Otherwise.. good?
0
0
Reportar a crítica