Schaller Lyra Acrylic NI

()

Mostrar tradução

Machine Head Set for Classical Guitar

Configuration: 3 Left / 3 right
The worm, worm gear and shaft are manufactured with the highest precision and mounted on a torsion-resistant base plate
Bearings made of particularly smooth material
Construction: Open
Buttons: Acrylic
Gear ratio: 1:16
Shaft length: 14.6 mm
Bore: 10 mm
Center distance: 35 mm
Fastening via screws
Schaller number: 10340163.31.13
Surface: Nickel
Fixing screws included
Made in Germany

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Maio 2004
número de artigo 169515
unidade de venda 1 peça(s)
Colour Nickel
Material of the Button Plastic

€ 66

Todos os preços incl. IVA

Posição de vendas

em Sistemas mecâncios para guitarra acústica

Eis o que compraram os clientes que visualizaram este artigo

31%

comprado

Este artigo exatamente

€ 66

11%

comprado

Harley Benton Concert Guitar Machine Heads

€ 6,90

comprado

Gotoh 35G1600-EW Classic Tuners G

€ 49

comprado

Gotoh 35G450 Classic Tuners N

€ 23,80

comprado

Harley Benton Parts Guitar Machine Heads

€ 5,90

53 Avaliações de clientes

5 43 Clientes 4 7 Clientes 3 0 Clientes 2 2 Clientes 1 1 Cliente

4.7 / 5

acabamento

Diretrizes de apreciações

34 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

great value

midoriya 12.05.2018

The old machine heads of my guitar weren't usable anymore and bought this set after some research.

I can honestly say these are more stable, except the D string needs to be turned more before it starts reacting. This could be due to the new strings, only time will tell, but its still usable.

I don't know if I am imagining it but I get the feeling that these also make my guitar sound a bit better than the cheap stock machine heads that it had. maybe its because they are heavier and have more mass.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Totally worthless

Ram S 10.01.2024

Bought this to replace the 20+ years old stock tuners in my Spanish made Azahar as they were falling apart. First impression out of the box, they totally seemed to be generic in appearance but I wouldn't prejudge. Upon installation with the help of a luthier, we first noticed that the tuning panels do not fit identically since the right side was slightly inclined towards the top of the machine head while the other was fine (but this is trivial). Then we realized that the low E tuner worked only one way. After a long time trying to know the reason, the luthier figured that the washer of that tuner has no flat sides where the tuning rod is supposed to cling to (while all the others have this). So we found out that both this washer as well as the whole right panel are not machined properly. We had to use a washer from the old tuners which actually didn't fit easily and needed a lot of work, but did work out eventually and allowed the low E tuner to work both sides. In another scenario if I didn't have another spare washer or if my spare washers didn't fit at all, this item would have been simply in the trash by now (returns are not possible where I live).

With regard to the general performance of this tuner set after installation, these are really no different than any Chinese made tuners. They don't keep the guitar in tune for anytime longer than the old stock ones. Their ratio and feel are also nothing special at all. I totally doubt this is made in Germany as written on the box. For this price I could have got two Gotoh sets or even three generic tuner sets that most likely wouldn't even have these factory mistakes.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Quite expensive, very accurate

Urpo 16.07.2015

Schaller's tuning set solved a problem with a middle priced classic guitar. The worn out machinery was easy to change thou it needed some small adjustment.

Tuning is absolutely easy with an accurate fine mechanical machinery. The difference to the original tuners is huge. That's why I can recommend this product to all who have the same problem with cheap or middle-priced acoustic guitar. - Maybe there are even better Schaller tuners for very valuable instruments...

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Good quality replacement machine heads

MrSniff 28.07.2020

Bought to replace manufacturer tuners which had started slipping after 7 years. These seem to hold the tension well and were easy to fit.

Reportar a crítica

Ler todas as reviews

Schaller Lyra Acrylic NI

Machine Head Set for Classical Guitar

Eis o que compraram os clientes que visualizaram este artigo

53 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

34 Críticas

Navegador inteligente

Servido com amor!

Schaller Lyra Acrylic NI

Machine Head Set for Classical Guitar

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

53 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

34 Críticas

Comparar opções

Navegador inteligente