Doepfer A-106-1 Xtreme Filter (MS20)

()

Mostrar tradução

MS20 Low/High Pass Filter

MS20 filter clone
Width: 14 HP / 70.8 mm
Depth: 40 mm (measured from the back of the front panel)
Power consumption: +30 mA (+12 V) / -20 mA (-12 V)

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Junho 2005
número de artigo 178322
unidade de venda 1 peça(s)
Width 14 TE / HP

Mostrar variações deste produto

Doepfer A-106-1 Xtreme Filter (MS20)

Doepfer A-106 Xtreme Filter (MS20) MS20 Low/High Pass Filter * MS20 filter clone * Width: 14 HP / 70.8 mm * Depth: 40 mm...

€ 120

Para o artigo

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

€ 79

Para o artigo

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

€ 149

Para o artigo

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

€ 99

Para o artigo

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

€ 222

Para o artigo

154

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

€ 88

Para o artigo

123

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

€ 35

Para o artigo

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

€ 119

Para o artigo

Doepfer A-106-5 SEM Filter Special Ed.

Doepfer A-106-5 SEM Filter Special Ed. Filter * 12 dB Multi-mode filter, in which the circuit of the SEM module is used ...

€ 86

Para o artigo

Doepfer A-199 Spring Reverb Module

Doepfer A-199 Spring Reverb Module Spring reverb module The Doepfer A-199 is a spring reverb module that via the aid of ...

€ 119

Para o artigo

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

€ 59

Para o artigo

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

€ 99

Para o artigo

€ 120

Todos os preços incl. IVA

Posição de vendas

em Módulos filter

Eis o que compraram os clientes que visualizaram este artigo

26%

comprado

Este artigo exatamente

€ 120

12%

comprado

Doepfer A-101-2 Vactrol Lowpass Gate

€ 99

comprado

Doepfer A-124 Wasp Filter SE

€ 88

comprado

Doepfer A-106-6 XP Filter

€ 150

comprado

Behringer 121 Dual VCF

€ 44

23 Avaliações de clientes

5 17 Clientes 4 4 Clientes 3 2 Clientes 2 0 Clientes 1 0 Clientes

4.7 / 5

manuseio

características

som

acabamento

Diretrizes de apreciações

13 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Not a straight MS20 clone - but awesome none the less

Martyn Q. 01.10.2015

I'll start by saying - this is *NOT* A STRAIGHT MS20 CLONE. To actually emulate the MS20 filter section you would need two of these patched in series - if you are purchasing for that MS20 sound bear that in mind, treat this as a completely different beast.
Now having said what this module isn't, I'll say what it is. Quirky, unusual, gnarly, crazy, raspy, openly-patchable, characterful - the list is endless. This is not a go-to bread and butter filter - take a look at the a106-5 sem filter if thats what you are after - but what it does, it does incredibly well. Balancing the input gain against the resonance and clipping levels can yield some incredible sounds - rasping brasses are a speciality for it. I also love using for drones as the deep lowpass with clipping is great when you patch out the resonance feedback path (I like using a189-1 vc bit mangler and a199 spring reverb on it). The filter responses are adjustable with trimmers on the board which is useful.
You wont find yourself using this on every patch, but it'll add so much to those weird and wonderful distorted sounds that you wont regret the investment.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

The great sound of the MS-20 filter for your modular

JohnD 18.06.2013

It's a very characteristic filter that can scream, but can sound quite mellow when tamed. One thing to bear mind is that it can be a bit confusing getting this filter to act like a standard low pass filter. This is because the low pass filter is normalled to the high pass filter i.e the signal goes through the low pass filter to the high pass filter. In principle you can set the high pass to zero (12 o'clock on the polarizer control) and the filter will just act as a standard low pass filter. In practice it is quite hard to hit the zero mark on the high pass filter and you get some of that going into the signal, which can dramatically change the sound of the low pass filter at low frequency settings. The easy way around that is to just put an unconnected jack plug into the high pass in. This will then completely bypass the high pass filter and the filter will act as a conventional low pass filter. That was the most confusing thing I found when trying this filter for the first time. Once you've sussed that out it's a great sounding filter with lots of character.

This filter is a must for anyone with a eurorack modular.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

A screaming monster once you feed it well!

Anónimo 11.01.2016

This has become one of my favourite filters. It definitely has that MS20 character, but, as is usual with Doepfer, goes much further. Some folks complain that it doesn't sound 'xtreme' enough, but this is all down to incorrect gain staging. That's what the gain input attenuator is for! I have found that it works best when set around 1 (out of 10). Crank the resonance past 5-6 and it turns into a musical screaming beast! There's a jumper on the back to turn HP input polarizer into a regular attenuator. I prefer this mode as you can easily turn off HP input without requiring dummy cables. With 3CV inputs and a feedback path what's not to love!

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Goo, quiet versatile and cheap filer

Maxgr 01.08.2017

very nice filer, even if it does not scream as the original ms20, it still sounds very nice
Thomann order to delivery delays are still difficult to be beat!! Well done Team!

Reportar a crítica

Ler todas as reviews

Doepfer A-106-1 Xtreme Filter (MS20)

MS20 Low/High Pass Filter

Eis o que compraram os clientes que visualizaram este artigo

23 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

13 Críticas

Navegador inteligente

Servido com amor!

Doepfer A-106-1 Xtreme Filter (MS20)

MS20 Low/High Pass Filter

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

23 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

13 Críticas

Comparar opções

Navegador inteligente