Doepfer A-110-1
Standard VCO for Modular System A-100Module A-110-1 (VCO) is a voltage controlled oscillator. The A-110-1 produces frequencies in a range of about 8 octaves, of which four waveforms are available simultaneously: pulse, sawtooth, triangle and sine wave.
The frequency of the VCO is determined by the position of the range switch and tune controller and the control voltages at the CV inputs. Thus, the VCO provides the possibility of frequency modulation. You can set the footage (octave of the fundamental) with the selector switch. The Tune control is used to fine tune the VCO frequency.
In the pulse wave the pulse width can be adjusted manually or by voltage control or modulated (PWM).
- Width: 10 HP/ 50.5 mm
- Depth: 55 mm (measured from the rear of the front panel)
- Power requirements: +90 mA (+12V)/ -20 mA (-12V)
-
Disponível desde Fevereiro 2003
-
número de artigo 154955
-
unidade de venda 1 peça(s)
-
Analogue Yes
-
Digital No
-
Width 10 TE / HP
-
variants Doepfer
-
Indicar Doepfer Módulos Oscillator
-
Módulos Oscillator Indicar na faixa de preços de 140 € - 180 €
-
para o grupo de produtos Módulos Oscillator
-
para o grupo de produtos Sintetizadores modulares
-
para o grupo de produtos Sintetizadores
-
para o grupo de produtos Teclados
-
Mostrar Informações do fabricante sobre Doepfer
-
Doepfer Teclados em resumo