Para o conteúdo da página

Guitar Multi-Stand

  • For up to three instruments
  • Adjustable position of neck and side holder
  • Side holder prevents damage caused by contact between the instruments
  • Gentle, soft padding
  • Collapsible
  • Also ideal for roundback guitars
  • Maximum load capacity: 30 kg
  • Dimensions when assembled: 50 x 52 x 67 cm
  • Transport dimensions: 70 cm x 52 cm x 13 cm
  • Weight: 2.65 kg
  • Includes 2 additional neck and 2 additional side holders

Note: Not suitable for permanent use for guitars with nitrocellulose lacquer.

  • Disponível desde Setembro 2023
  • número de artigo 567288
  • unidade de venda 1 peça(s)
  • Material Steel
  • Type for 3 Instruments
  • Suitable For: Acoustic Bass, Electric Bass, Electric Guitar, Steelstring Guitar
  • For Instruments with Nitro Lacquer No
€ 45
Todos os preços incl. IVA
Em stock
1

9 Avaliações de clientes

4.7 / 5

estabilidade

acabamento

9 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Better than expected
J.Spw 20.06.2026
I rarely write reviews, but for this product I had to. I tried other similarly priced products, which left me frustrated by the low quality and plain disregard to offer a fair product. This one just exceeded my expectations: Easy to assemble, stable, adjustable, and good looking (this one of course subjective). For home usage, a lot of quality for the money.
acabamento
estabilidade
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Build quality could be a bit better
JesNow 09.06.2026
One set of holes in the lower cross bar were off by 2mm, thankfully I was able to wedge it in there without having to resort to drilling to expand the holes. The bolts are of a weak material, make sure to use a low torque if you're using an electric screwdriver to avoid stripping the bolt heads.

This fit my acoustic guitar, electric guitar, and bass guitar. I was also able to kinda fit my concert ukulele by putting it on the very end and using the bottom supports to rest it again the edge bar.
acabamento
estabilidade
0
0
Reportar a crítica

Reportar a crítica

google translate fr
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
C
Pratique et fonctionnel !
Chnar 26.02.2024
Acheté pour remplacer à la base 2 supports guitares individuels et encombrants surtout au niveau des piétements, j'ai été très agréablement surpris par le coté fonctionnel et l'emprise au sol très réduite.
Conçu à la base pour installer 3 guitares (acoustiques et/ou électriques), il est même possible d'en poser une 4ème (support supplémentaire fourni)
Les possibilité de réglages pour les différentes guitares sont un plus !
Très bon matériel et de bonne fabrication !
acabamento
estabilidade
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
t
Ganz ok.
tmatz 31.12.2024
Vorweg, der Ständer ist für bis zu vier Instrumente ausgelegt. Man kann die Abstandshalter unten, sowie die Halshalter oben, individuell positionieren. Das ist bestimmt für viele sehr praktisch. Leider stehen die Gitarren sehr schräg darin, sodass man bei großen Gitarren (Hollowbody) oder Bässen, den Ständer sehr weit von der Wand wegrücken muss. Ich habe diesen hier wieder verkauft und mir den Guardian von K&M geholt. Da stehen die Gitarren sicher und steiler drin, was ich besser finde.
acabamento
estabilidade
0
0
Reportar a crítica

Reportar a crítica