Para o conteúdo da página

Potentiometer

  • 500 kOhm
  • Logarithmic
  • Knurled shaft (split shaft)
  • CTS potentiometers are the first choice for many American guitar models
  • Low tolerance for reduced variation and greater accuracy
  • Total height: 30 mm
  • Overall diameter: 23.5 mm
  • Thread length: 9.5 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6.35 mm
  • Allparts no. EP-0086-000
  • Disponível desde Abril 2017
  • número de artigo 411573
  • unidade de venda 1 peça(s)
  • Design Split Shaft US
  • Resistance Value 500 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 9,0 mm
  • Tandem Poti No
  • Push/Push No
  • Solderless No
  • shaft type grooved
€ 9,90
Todos os preços incl. IVA
Em stock
1

333 Avaliações de clientes

4.7 / 5

acabamento

137 Críticas

x
xeriff 07.11.2019
Adquirido para fazer um rewiring a uma guitarra. Nada a apontar. Cumpre o propósito, sem degradação de som aparente.
acabamento
0
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Good quality pots but definitely not "low tolerance".
TCSMD 11.10.2021
These are good quality pots, as expected from CTS. The tolerance isn't quite as tight as I would ideally want though. I normally buy CTS pots with tighter tolerances from other sources but I was running out of 500k pots and didn't have a new shipment coming in soon enough for a couple of jobs with high priority so I took a chance on these.

The actual values I got varied from 481k to 542k which isn't really tight enough for my needs. If one of my customers specifies 500k for an electronics upgrade I need the actual values to be a little closer than this. I guess it's within the tolerance for standard CTS pots but Thomann have these pots listed as "low tolerance" which they are most definitely NOT so that's one star off the total ratings for the misleading marketing.

To sum it up: The quality of these pots is very good but if you need them to actually be close to 500k you had better look elsewhere for pots with tighter tolerances (or buy a lot of them and hope you win the lottery).
acabamento
8
2
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
N
Excellent touch
NunoPacheco 17.01.2026
Very good and smooth working. It is stable and reliable.
No sound interference at all. I recommend.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
range issue
Steph000 04.03.2023
Used as a tone pot with a fender .022uf capacitor mounted as typical 60s wiring, I get almost an on/off effect around 1 most of the course having close to no effect on sound.
Not sure if the pot or the capacitor is in cause.
acabamento
1
0
Reportar a crítica

Reportar a crítica