Para o conteúdo da página

Locking Machine Head Set for Electric Guitar

  • 6 Pieces
  • Style: 6-in-Line
  • Bass side/right hand
  • Staggered post design
  • String gauges were considered in gear ratio: Half a turn corresponds to 1 semitone per string
  • Faster, more accurate tuning of each string
  • Locking screw on the back for clamping the string
  • Contemporary buttons
  • Closed construction
  • 2-Pin assembly
  • Mounting hole diameter: 9.7 mm
  • Shaft diameter: 6 mm
  • Gear ratio: E - 12:1, B - 20:1, G - 35:1, D - 20:1, A - 24:1, E - 39:1
  • Surface: Chrome
  • InvisoMatch standard mounting plates included for using existing screw holes
  • Disponível desde Setembro 2018
  • número de artigo 448759
  • unidade de venda 1 peça(s)
  • Colour Chrome
  • Locking Yes
  • Design Modern
€ 169
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

20 Avaliações de clientes

4.2 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

18 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
EV
Fitted my Schecter Nick Johnston just fine
Emil Vakhitov 27.01.2022
I bought these tuners to remove a string tree on my Schecter Nick Johnston guitar after watching Jonathan Koh's video on Youtube.
At first the tuners of the 1st and 2nd string seemed too short for me, but they appeared to be just high enough. They hold the tuning great, and due to the fact that they are staggered I could remove the string tree and really got rid of the problem of detuned 1st and 2nd strings after using tremolo.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
w
Drop-in replacement for Yamaha Pacifica
wristblade 05.11.2021
These are drop-in replacements for Yamaha Pacifica. They come with adapters that would fit most of electric guitar tuner attachments (one screw at 135 degrees, or one at 90 degrees with respect to the tuning key pole. I did not need the adapters, since the 2 pins fall right in the holes drilled from the factory, but you can use them should you need to. Check the manufacturer website for more info.

And they are staggered as well, which is nice.

One of them has the finish a bit hazy, that's the only minus I can find for the 4 stars.
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Expensive but worth every cent!!!
Jabs 16.10.2019
Installing the 6 in line tuners on a non Fender guitar is also "piece of cake" thank's to the mounting plates.
Every tuner has a different gear ratio, after getting used to "it's great."
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Never a problem
MatteoG 05.05.2025
Install on a Fender Mustang Competition HH. Easy installation and never a problem.
acabamento
0
0
Reportar a crítica

Reportar a crítica