Para o conteúdo da página

Machine Head Set for Electric Bass

  • F-Style
  • Style: 4 Left
  • Bore: 18.5 mm
  • Gear ratio: 1:22
  • Surface: Nickel

Hole spacing on the base plate:

  • Narrow side: 20 mm
  • Wide side: 26 mm
  • From top to bottom: 34.4 mm

Dimensions of base plate:

  • Length: 45.3 mm
  • Width 1: 33.35 mm
  • Width 2: 27.2 mm
  • Disponível desde Dezembro 2019
  • número de artigo 480068
  • unidade de venda 1 peça(s)
  • Colour Nickel
€ 45
Todos os preços incl. IVA
Em stock
1

36 Avaliações de clientes

4.9 / 5

acabamento

28 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Put them on an old neck. Great tuners!
Muziekschuur 10.12.2020
The good stuff! Nuff said. Thomann sells them. Get some.
Tune up and rock out.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Good budget replacements
Jezzaboy 18.04.2020
Cheap tuners are part of the reason some basses are lower price. You cannot spend £300 and expect USA quality. Usually I would buy a set of Schaller tuners as they are my favourites but they are about £70-£80 delivered.

I recently picked up a cheap Squier and thought I would try the Kluson tuners to keep the cost down. They are quite good and keep the vintage look I was looking for. I still prefer my Schaller`s but for a budget bass, these do the trick fine.
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
c
Tuners are OK but screws way to fragile
clowl 02.07.2025
I bought these tuners for an original Fender MiM neck. When mounting the tuners half the screws broke (head broke off) before it was fully tightened. Gave me a lot of extra work drilling out the metal and fitting new screws.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Passen perfekt auf fenderstyle Bässe
Jakobson 10.10.2021
Mein Fender MiM Neck hat echt merkwürdige Lochbohrungen und da ich keine zusätzlichen Löcher bohren wollte, bin ich schließlich bei den Kluson gelandet. Diese passen als eine der wenigen perfekt und haben den klassischen Fender Look.
acabamento
2
0
Reportar a crítica

Reportar a crítica