Para o conteúdo da página

3G HD-SDI BNC Coaxial Cable

  • Length: 0.45 m
  • Made from a high-performance RG-6 coaxial cable with 75 Ohm BNC plugs at both ends
  • Inner conductor: 18 AWG solid copper wire
  • Dielectric: Foam skin
  • Shielding: (A) 61% aluminium wire braid 34 AWG, (B) double foil / Mylar with 25% overlap
  • Outer sheath: PVC
  • Colour: Dark grey
  • Inner conductor diameter: 1.0 mm
  • Diameter of dielectric: 4.6 mm
  • Outer diameter: 7.0 mm
  • Impedance: 75 Ohm
  • Ohmic resistance: 21.8 Ohms / km
  • Capacitance: 53.1 pF / m
  • Tested up to 3G
  • Disponível desde Julho 2020
  • número de artigo 498264
  • unidade de venda 1 peça(s)
  • Application Video
  • Input connector BNC male
  • Output connector BNC male
  • Length 0,50 m
  • From Plug BNC male
  • To Plug BNC male
  • Colour Gray
  • Transfer rate [Gbit / s] 3
€ 7,50
Todos os preços incl. IVA
Desconto de quantidade
Preço unitário Poupará Montante
€ 7,50 1
€ 7,19 4,1% 5
€ 6,89 8,1% 10
Em stock
1

31 Avaliações de clientes

4.8 / 5

acabamento

16 Críticas

rj
produto com elevada qualidade nos materiais aplicados
ritmo jovem 29.10.2021
muito bom os materiais aplicados no sei fabrico
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
s
Not cheap but good quality
stergi 11.06.2021
We needed something rigid for frequent plug/unplug senarios. Kramer SDI cables have this thick nylon sleeve if you see the pictures. That gives longevity and rigidness to the cable.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MM
Super Kabel
MB Medien 09.03.2021
Solide Verarbeitung und super praktisch für Racks oder kurze Einsatzzwecke!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Gut, aber steif
MotoMoto 31.01.2023
Gutes, kurzes Kabel. Hab es bei mir im Rack eingebaut, um die Stecker des Videomischers mit den SDI Durchgängen hinten an der Blende zu verbinden. Dafür reicht es allemal, wenn auch das Kabel und der Stecker doch sehr steif und unflexibel sind. War also etwas friemelig, hat im Endeffekt aber funktioniert.
Wer was flexibles sucht sollte lieber ein anderes Kabel nehmen.
acabamento
0
0
Reportar a crítica

Reportar a crítica