Para o conteúdo da página

Universal Spigot 16 mm

  • With 1/4" and 3/8" thread
  • Disponível desde Fevereiro 2015
  • número de artigo 358708
  • unidade de venda 1 peça(s)
  • Type Mini-TV Spigot
  • Diameter of bolt/flange socket bigger side 16 mm bolt
  • Diameter of bolt/flange socket smaller side not existing
  • Thread bigger side 3/8" male
  • Thread smaller side 1/4" male
€ 4,99
Todos os preços incl. IVA
Em stock
1

22 Avaliações de clientes

4.8 / 5

acabamento

12 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
CP
Small, but effective adapter
Colin Pearson 06.07.2026
We use hundreds of these, usually screwed in one side of Manfrotto magic arms, or in Manfrotto super clamps, with the 3/8" BSW thread visible, which suits audio equipment . It is reversible, if you prefer 1/4" thread for cameras etc. We like the hole in the middle, which is useful for attaching safety bonds or cable ties, and we like that they are shorter than the "full length" spigots, because the reduced leverage means that they are less likely to snap off when subjected to shocks (removing the remains of snapped spigots from magic arms is not fun...)
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
W
Eigentlich gut, aber...
Wohldi 18.06.2020
Der Adapter tut was er soll.
Jedoch lässt er sich nur wirklich in 2 Positionen an einer Super Clamp befestigen. Dafür muss die Feststellschraube exakt durch das Loch des Zapfens. Abhängig von den Umdrehungen des Gewindes stimmt dann aber der Winkel nicht mehr. Kommt halt drauf an, was man wie montieren und ausrichten möchte.
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Einfach auf Vorrat kaufen, falls man's braucht!
TonyFrickler 12.10.2016
Ich brauch es um ein Mikrofon auf einen Manfrotto 237HD Flexarm zu setzen. Ist eigentlich schade, dass so ein Teil nicht von Vorneherein bei dem Flexarm mit dabei ist.

Sowas in der Adaptertasche zu haben schadet eh nicht. Ist immer ärgerlich, wenn was mit diesen kleinen Mikrofongewinden und großen Mikrofongewinden und Kameragewinden und metrischen Gewinden mal nicht passen will. Besonders, wenn das dann erst vor Ort beim Aufbau offenbar wird.

Größere Gewichte, als eben ein Mikrofon würde ich da aber nicht dranschrauben. Immerhin ist das kleine Schräüubchen nur aus Messing. Und das ist bestimmt nicht soooo mega-belastbar, um da noch größere, ausufernde Gestängekonstruktionen daran zu bauen.
acabamento
0
0
Reportar a crítica

Reportar a crítica