Para o conteúdo da página

Speaker grille

  • Diameter: Ø 20.3 mm (8")
  • Classic shape
  • Square perforation
  • With rubber border
  • Painted black
  • Disponível desde Fevereiro 2006
  • número de artigo 190702
  • unidade de venda 1 peça(s)
  • Electronic Accessories No
  • Cabinet Accessories Yes
  • Stand a. Flying Stud Accessories No
€ 6,50
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

38 Avaliações de clientes

4.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

15 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
PR
Peter R. 438 28.08.2015
I build & repair valve amps, so I use these a lot when modifying or making amp combos.

These look good and certainly protect your fave speakers from any damage, much more than cloth.

These also let all the sound get away from your speakers far better than any cloth covers (tested with mt DB meter). OK, just a couple of decibels, but every little counts when the venue is full of talking/shouting people.

These two 8 inch speaker grilles are being used on an acoustic amp that always rides with me in my van & will be tested many times as I carry lots of other junk in the van, so any quick braking or cornering is the test as my amp rolls around sometimes. These are good and will easily take some abuse.

Thomann price and delivery times easily beats any local music shop.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
KP
8''-Lautsprecher Schutzgitter MONACOR MZF-8629
Karsten P. 30.10.2009
Dieses Lautsprecher Schutzgitter ist gut verarbeitet und ausreichend stabil. Im Vergleich zu Schutzgittern, die ich in den '90igern gekauft habe, fällt auf, daß die Stabilität des MONACOR MZF-8629 nicht deren Niveau erreicht.

Die Material-stärke ist sichtbar dünner, es läßt sich minimal eindrücken ohne zu das eine Beule bleibt, was bei den älteren Schutzgittern überhaupt nicht möglich ist. Ebenso ist die Gummiauflage deutlich dünner, was bei zu starken Druck durch zu festes anziehen der Schrauben zu Beschädigungen führen kann.

Der Hersteller dieser älteren Scutzgitter ist mir leider nicht bekannt. Fazit: Trotz der geringen Unterschiede bietet es mehr als ausreichenden Schutz und somit halte ich es für praxistauglich.
acabamento
0
0
Reportar a crítica

Reportar a crítica