Para o conteúdo da página

Rockboard Flat Patch Y Splitter Cab 30cm

4.8 de 5 estrelas de 150 avaliações de clientes

Y-Splitter Cable

  • Length: 30 cm (11 13/16")
  • Flat Y-splitter cable with rectangular cross-section
  • For splitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loops
  • Space-saving and extra narrow angled jack plugs
  • 2x Separate flexible copper conductors: 20 x 0.12 mm
  • Wrapped copper screen: 34 x 0.12 mm
  • Polyethylene signal isolation
  • PVC external insulation
  • Capacity of less than 10 pF / decimeter
  • Conductor resistance of less than 10 mOhm / Decimeter
  • 1x Angled 6.3 mm TRS jack plug
  • 2x Angled 6.3 mm TS jack plugs (gray / black)
  • Tip = Grey
  • Ring = Black
  • Working temperature: -15 ° C to + 70 ° C
  • External dimensions of cable (W x H): 4 x 3 mm (rectangular)
  • External dimensions of plug (W x H): 12.5 x 7.5 mm
  • Colour: Black
  • Disponível desde Agosto 2018
  • número de artigo 445215
  • unidade de venda 1 peça(s)
  • Colour Black
  • Length 0,30 m
  • Connector 1 Jack 6,3mm TRS male angled
  • Connector 2 Jack 6,3mm TS male angled
  • to Connector Jack 6,3mm TRS male angled
€ 9,20
Todos os preços incl. IVA
Em stock
1

150 Avaliações de clientes

4.8 / 5

acabamento

66 Críticas

Vd
Para usar no Loop insert de pedais
Velho do Restelo 23.01.2024
Comprei para usar em pedais com loop insert ( em que o send/return estão no mesmo orificio). No meu caso especifico para usar no insert do Guv'nor da Marshall ou no Palmer Pocket Bass amp.
Fui aconselhado pelo staff da Thomann, pois não fazia ideia de que cabo precisava, que são de uma excelente qualidade no atendimento.
O cabo cumpre a sua função sem qualquer problema ou perda de sinal.
Prós:
- Tem um ar sólido
- os terminais têm aspecto duradouro
- preço
- não tem perda de sinal
Nada a apontar contra. Não hesitaria em comprar de novo se necessitar
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
TS
Very happy works good!
Theofanhs Siderhs 07.02.2022
from the few options on the market, Ιt helps me to leave the solid output of the iridium and to enter the input of the delay echoplex which is trs, the second one goes from the trs output of the echoplex to the 2 inputs of the prod2 DI, it works perfectly so far of course the cables are a bit thin and the only thing that helps is that there is more dancing on my pedalboard.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
J
Insert cable
JensWel 21.10.2022
Used to insert EQ into vocal processor in rack.. In this stationary environment the cable works, but it could be too flimsy for taking out and in repeated times.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Intermittent connection
AleksanderS 15.02.2025
I've had it for 2 years, but it has been dropping connection since the day I bought it and first connected it. Have to fiddle with it to get it to the right position to get the sound to go through, and then it might work for a while. Looks like a manufacturing defect or a quality-control issue, which I guess can happen. It would be a really good cable if it was working fine, other users seem to be happy with theirs. Bought it to use it with my Rockboard MOD 3 Patch Bay. The flat cable has great rubber and is really nice and soft, easy to handle, and the L connectors are small and waste no room.
acabamento
0
0
Reportar a crítica

Reportar a crítica