Para o conteúdo da página

Rockboard MOD 3 V2 TRS & XLR Patch Bay

4.5 de 5 estrelas de 38 avaliações de clientes

All-in-one patch-bay for pedalboards

  • Suitable for MOD Slots in RockBoard Pedalboards
  • Compatible with a wide range of other pedalboards
  • Acts as a central access point to the effect setup
  • Establishes clear cable routes to and from the pedalboard
  • Removable front panel for mounting on or under pedalboards
  • 3x 6.3 mm TRS thru
  • 2x XLR thru (male front / female rear)
  • 1x XLR thru (female front / male back)
  • 1x DC 2.1 x 5.5 mm hollow plug thru
  • 1x AC IEC thru (male front / female rear)
  • All connections mirrored on the rear side
  • Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
  • Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
  • Weight: 450 g
  • Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Aviso Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.
  • Disponível desde Agosto 2019
  • número de artigo 468599
  • unidade de venda 1 peça(s)
€ 71
Todos os preços incl. IVA
Em stock
1

38 Avaliações de clientes

4.5 / 5

acabamento

29 Críticas

j
Bom produto mas muito caro
jonymimoso 28.12.2024
Um produto indispensável para quem utiliza a guitarboard da marca mas considero muito caro para um produto simples.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
T
Total disappointment
TsalerA 30.08.2021
This is the reason of my bad evening.
Bought it to use with Rockboard pedalboard + Rockboard PSU. Looks cool, but that's all.
1. You have to do an screw-thread in the native pedalboard fof this thing by youself! Guys at the factory were very busy)) DIY!!!
2. It's patch-bay for the XLRs! Guess what?) XLR plugs do not fit in to the pedalboard holes!
3. Connected this thing to the native RB PSU. And it's very very noisy! Spend an hour looking whats the problem. It's this thing!!! Unpluged PSU fron this thing. connected PSU bypassing this thing, and it become less noisey!

Summary: This thing is patch-bay for xlrs, jacks and power.
You can not use this with XLRs and Rockboard pedalbords. You Can not use this with Rockboard PSU. This thing is useless. Waste of money(
acabamento
4
4
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Can't imagine using my Rockboard without it
AleksanderS 15.02.2025
Been using it in my Rockboard 4.2 for over 2 years now. I have a BOSS RC-600 looper on my board along with 11 other pedals, and it makes everything very convenient and tidy. No added noises to the system, no complaints about build quality. Bought an XLR reverser adapter cable so I can connect 2 mics to it, two of the 1/4" outputs are routed as L & R mono outputs from RC-600, and the third jack output is for Stereo Headphone Out, very convenient. 3x 1/4" TRS outputs can be turned into 6x mono in-outs using Y-splitter cables, which is great versatility. The added 9V output great for powering any extra pedals that are not permanently on my board that I might be using or trying out. It saves a lot of time and mess - no fiddling about with cabling, going under the board to connect or route something - just plug what you need in the MOD 3 patch-bay, connect the power cable, and everything works.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
LR
I love it!
Love Rockboard 02.06.2021
Makes my board a lot neater and it looks cool too! Perfect for singer/guitarists (like me) or anyone that needs a few xlr ports on top of the normal jacks.
acabamento
1
0
Reportar a crítica

Reportar a crítica