Schaller M6 135 Locking 3L/3R BC

Iniciar 360°

Mostrar tradução

Clamping Machine Head Set for Electric Guitar

Precise, wear-free premium mechanisms
Small, lightweight design
Model: 3 Left/right
With Velvet-Tec and LX6-Lube technology
Very high quality surface finish due to improved manufacturing processes
Construction: Closed
Wings: M6 Metal large
Ratio: 1:18
Shaft length: 19.5 mm
Bore: 9.8 mm
Mounting: Screws & Locknut
Screw ear: 135°
Schaller article nr: 10020423.02.52
Finish: Black chrome-plated
Including: Fixing screws, banjo bolts and washers
Made in Germany

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Janeiro 2003
número de artigo 159043
unidade de venda 1 peça(s)
Colour Black
Locking Yes
Design Modern

€ 139

Todos os preços incl. IVA

Posição de vendas

em Sistemas mecânicos 3L/3R para guitarra eléctrica

Eis o que compraram os clientes que visualizaram este artigo

32%

comprado

Este artigo exatamente

€ 139

10%

comprado

Gotoh SG381-07 MG-T Locking 3L/3R B

€ 69

comprado

Grover 502BC Locking Rotomatics

€ 161

comprado

Gotoh SG381-01 MG-T Locking 3L/3R CB

€ 79

comprado

Harley Benton Parts Locking Tuners 3R/3L BK

€ 45

137 Avaliações de clientes

5 123 Clientes 4 9 Clientes 3 3 Clientes 2 1 Cliente 1 1 Cliente

4.8 / 5

acabamento

Diretrizes de apreciações

79 Críticas

Schaller M6

Bfsr 13.06.2024

Afinadores muito estáveis, fáceis de montar..
Muito satisfeito com eles..

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Quality upgrades for 3+3 headstock

Andy Fereday 11.11.2020

I got a set of these to go on a Peavey SC-2 which I'm using as a platform for upgrading. They fit the existing holes very well and were really straightforward to fit. I put them on at the same time as a String Butler (the V3 model) and didn't have any problems fitting both together.

Installing new strings was really easy and quick. I didn't wrap the strings round the posts at all, just threaded them through the post, tightened the locking screw on the back, trimmed the ends off and tuned up. I was a bit nervous about whether this would hold the strings tightly enough, especially after cutting the ends down so short. Have to say, they're holding absolutely fine.

Tuning stability is really good with these on. You'll need to allow strings to stretch for a couple of days but then they seem to hold tuning really well.

The only word of caution I have is that the black coating can be easy to scratch when you're installing the machine heads. What I found helped was using one of those spanners that fits over the nut completely (the sort that comes in Ikea kits).

Very happy with these machine heads. They feel like they're really good quality. They're not exactly stiff to tune but they don't have that loose feeling of the old tuners I had on the guitar.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

outstanding

rabid 14.12.2021

love the feel of these, and they look great.
Couldn't do without the locking tuners now lol

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Great tuners - but just watch out for the shortish capstan

Rick A 06.11.2022

These replaced very old Gotohs without any need for additional screw holes, which made life very easy. However what I had not realised is that the capstan height is shorter, leaving very little to rise above the headstock. I had a choice of either sending them back or reducing the thickness of the headstock and I did the latter, sanding about 2mm off the back of it so that when fitted the capstan holes were nicely positioned to take the strings. Quite obviously this would not have been an option for the majority of projects, so just check that capstan height before you order to make sure it is sufficient. If it is then you're good to go, if not I suggest looking elsewhere. Now they fit I am very happy with them.

Reportar a crítica

Ler todas as reviews

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Eis o que compraram os clientes que visualizaram este artigo

137 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

79 Críticas

Navegador inteligente

Servido com amor!

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

137 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

79 Críticas

Comparar opções

Navegador inteligente