Sonarworks SoundID Ref Measurement Micro

Iniciar 360°

Mostrar tradução

Condenser Measurement Microphone

An individual calibration profile with 0°, 30° and 90° off-axis measurement is available for download for each microphone
MEMS transducer with electret condenser capsule
Frequency range: 20 - 20,000 Hz with measurement protocol
Polar pattern: Omnidirectional
Sensitivity: 14mV / Pa
Inherent noise: 24 dB
Signal-to-noise ratio: 65 dB (A)
Dynamic range: 106 dB
Max. sound pressure level: 124 dB
Requires 48V phantom power
Connection: XLR 3-pin
Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
21-day trial version of Sonarworks SoundID Reference available online

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Março 2021

número de artigo 515342

unidade de venda 1 peça(s)

€ 75

Todos os preços incl. IVA

Posição de vendas

em Microfones de medição

Eis o que compraram os clientes que visualizaram este artigo

69%

comprado

Este artigo exatamente

beyerdynamic MM 1 (2023)

84 Avaliações de clientes

5 74 Clientes 4 8 Clientes 3 1 Cliente 2 0 Clientes 1 1 Cliente

4.8 / 5

características

acabamento

Diretrizes de apreciações

57 Críticas

bom microfone de referencia

Paulo M. 01.10.2021

bom microfone de referencia para usar com o software da sonnarworks

os meus monitores de estudio tem um som muito melhor

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Excellent results with a little work

samxu 10.11.2021

This software does not negate the need for some room treatment at least in my case. My experience was also confounded by balancing in a sub woofer as well as measuring the mains. I'm using two Focal shape twins and a Focal Sub 6. My room is not perfectly treated but has some treatment including some bass traps. Deviations from 300hz to 20Khz were less than 3db. The major deviations were from 50hz to 100hz. One configuration when measured produced a 12db hump in the lower region. This software did not do well with taming that hump. Once I got the bottom end to within 6db of flat the software did a wonderful job of producing a very true sound in the room. The speakers and this software are all new and were installed at about the same time. The final result was a better, flatter sound than I have ever experienced in this room and is very trustworthy. I am hearing subtleties that I have never heard before and am going through old mixes making some real impactful changes. The room measurement and the VST plugin work perfectly which is what I needed most. I am working with support to get the APO working if possible. Regardless of the functioning of the APO, I gave this software 5 stars because using the VST in Cubase and Wavelab have made a significant positive change in my mixing and mastering abilities.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

The story is about idea of the measurement concept.

AlphaDo.ch 05.01.2022

This story is about idea. Idea about Measurement concept. Of course, each studio monitors, each room acoustics are different. Probable you should measure it to get a best possible result. This measurement option is good, but it needs a lot of improvements.

I would say, that would be a great solution for music listeners and producers if this concept works without PC or Mac. If some hardware option, for example some small box with programmable profiles (2 profiles for headphones and 2 for studio monitors) could be placed behind the sound interface. Otherwise you should always switch profiles and drivers.

When I master music, I use 2 pairs of headphones and monitors. For example, when using the profile for first headphones, the other headphones or monitors are practically unusable. In fact, after all tests I turned it off. Currently I only use it in special situations.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

The only one you need

Chief Janez 17.02.2022

Since this is an official Sonarworks product you can't go wrong with it. The microphone and the packaging are of the highest quality, would recommend.

Reportar a crítica

Ler todas as reviews

Sonarworks SoundID Ref Measurement Micro

Condenser Measurement Microphone

Eis o que compraram os clientes que visualizaram este artigo

84 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

57 Críticas

Navegador inteligente

Servido com amor!

Sonarworks SoundID Ref Measurement Micro

Condenser Measurement Microphone

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

84 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

57 Críticas

Comparar opções

Navegador inteligente