Para o conteúdo da página

Potentiometer for Guitar and Bass

  • To fade in the neck/bridge pickup (on ST-style electric guitars) or completely remove the tone control from the circuit when fully turned up
  • Resistance curve: Vintage Audio Taper (30%)
  • Offers the smallest resistance tolerance available (10%)
  • Solid brass shaft and thread
  • Robust vintage style "dimple" construction
  • The "Vintage Audio Taper" resistance curve lies between a logarithmic and a standard linear potentiometer for a more natural control response
  • Resistance: 250 kOhm
  • Shaft: Fine-fluted slotted shaft (24 teeth for US guitars and potentiometers)
  • Thread length: 6.4 mm
  • Thread diameter: 9.5 mm
  • Shaft diameter: 6 mm
  • Body diameter: 23.8 mm
  • CTS-D-A250K-NL
  • Includes washer, gear washer and nuts
  • Disponível desde Novembro 2021
  • número de artigo 530406
  • unidade de venda 1 peça(s)
  • Design No-Load
  • Resistance Value 250 kOhms
  • Characteristic Curve Vintage Taper
  • Thread Length in mm 6,4 mm
  • Tandem Poti No
  • Push/Push No
  • Solderless No
  • shaft type grooved
€ 9,90
Todos os preços incl. IVA
Disponível em 1-2 semanas
Disponível em 1-2 semanas

É previsível que este artigo entre brevemente e stock e o despacho poderá ser feito de imediato.

Informações sobre o envio
1

13 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

6 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
Was faulty
Dreams 01.05.2023
It is a no-load pot and I installed it on a strat but unfortunately it was faulty. after de-bugging the signal path I found it was this pot tha was faulty. I also measured it and the reading was really bad.
Maybe I was just unlucky :-)

Next time I will buy Bournes or Fender pots in the future, I have good experience with them.
acabamento
1
0
Reportar a crítica

Reportar a crítica