Temple Audio Design Pedal Plate Medium

Mostrar tradução

Metal Plate with Double-Sided Adhesive Tape

Quick-release pedal attachment system
4 Bolts for fixing to the board
Dimensions: 57 x 57 x 12 mm
Weight: 20 g
Includes screws
Made in Canada

30 dias dinheiro de volta

Disponível desde Agosto 2015

número de artigo 368420

unidade de venda 1 peça(s)

€ 4,90

Todos os preços incl. IVA

Desconto de quantidade

Preço unitário	Poupará	Montante
€ 4,90		1
€ 4,79	2,2%	5
€ 4,59	6,3%	10
€ 4,35	11,2%	15

Posição de vendas

em Outras peças sobresselentes

Eis o que compraram os clientes que visualizaram este artigo

32%

comprado

Temple Audio Design Pedal Plate Large

€ 6,90

15%

comprado

Temple Audio Design IEC AC Mains Micro Module

€ 59

comprado

Temple Audio Design Mini Module Plate

€ 23,90

comprado

Temple Audio Design Micro Module Plate

€ 11

119 Avaliações de clientes

5 87 Clientes 4 20 Clientes 3 10 Clientes 2 2 Clientes 1 0 Clientes

4.6 / 5

acabamento

Diretrizes de apreciações

56 Críticas

funciona

Dener Rosa 21.07.2024

ideia muito boa porem um ponto negativo é quando se quer substituir o pedal da board, é uma trabalheira tirar a plate e sempre ficam residuos de cola no pedal

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Very handy, but beware...

CROiga 16.03.2018

Very clean solution from temple design audio, very well thought of, but a word of advice,.... don't put it to the pedal first,... big mistake,... lock it to the board first,.. where you want it to be,.. and then press the pedal on the plate,.... maybe not an issue with the pedal that needs just one plate, but for foot controllers and for example Roland gr55 synth that I use I used 4 of those plates,.... so it is next to impossible to get it to the right spot and manage to lock it firm to the pedalboard aiming all the holes..... so as I said, first put it all to the pedalboard, lock it with the supplied screws and then press the pedal/ processor /controller to it,..... now it fits perfectly,..... I wish someone told me this beforehand... I wouldn't ruin 3 perfectly good plates trying to pry it open from the controller.
I know it is cheaper to just get hook tape and put it on the pedalboard, but this really saves time, and looks very cool and professional.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Perfect size plate for your Audio Temple Board

Anónimo 04.07.2016

These adhesive plates are perfect for any boss sized pedal, to affix to a Temple Audio board, mine is a Duo 24. Personally I recommend using 2 x medium plates for a big pedal, such as a preamp or a DI, rather than 1 x large, as rubber feet usually get in the way of the large pedal plates, in my experience anyway. Also having 2 x secure points fastening the pedal to the board seems preferable over 1.

The quality is quite high, and I cannot see it ever becoming a case where my pedals will easily become unfastened from the board. I can recommend before fastening to the board, to clearly mark out where you want your pedals to go, keeping specifically in mind, the input and output jacks of all pedals, along with power points, as you want a little bit of manoeuvrability with cables etc. Also, I'd recommend palcing the plates on the board first, and slowly lowering the pedal down on to the adhesive rather than fastening the adhesive plate first. It just seems that little bit easier.

With the medium plates, try to fix it to the bottom of the pedal, that is, where you will actually be placing most weight on the pedal with your foot.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

prpp 16.02.2021

I guess it does what it's supposed to, however I find that the elevation of the pedal makes it just a bit weird when you step on it. I assume if would use more that one so that you would have support on top and bottom of the pedal it would be more stable. In my case, I'll go back to velcro hook and loop.

Reportar a crítica

Ler todas as reviews

Temple Audio Design Pedal Plate Medium

Metal Plate with Double-Sided Adhesive Tape

Eis o que compraram os clientes que visualizaram este artigo

119 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

56 Críticas

Navegador inteligente

Servido com amor!

Temple Audio Design Pedal Plate Medium

Metal Plate with Double-Sided Adhesive Tape

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

119 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

56 Críticas

Comparar opções

Navegador inteligente