Para o conteúdo da página

19" Power Strip / Power Distributor

  • Eight sockets on the back
  • Two Power Twist TR1 (1 x In, 1 x Out) on the front
  • 19" Rackmount
  • Rotatable 19" angle
  • Installation depth: 45 mm
  • Cable length: 2 m
  • Format: 19" / 1 U
  • Colour: Black
  • Disponível desde Dezembro 2024
  • número de artigo 587117
  • unidade de venda 1 peça(s)
  • Colour Black
  • Cabel type H07RN-F
  • Wire Diameter 1,5 mm²
  • Lenght [m] 2 m
  • Input Power Twist TR1 male
  • Power socket outputs 0
  • Euro plug outputs 8
  • USB Outputs 0
  • PowerTwist Outputs 0
  • PowerTwist TR1 Output 1
  • IEC Outputs 0
  • UK Plug outputs 0
  • Switch No
  • Voltage protection No
  • Rack unit Yes
€ 39
Todos os preços incl. IVA
Disponível em 5-7 semanas
Disponível em 5-7 semanas

É previsível que este artigo entre brevemente e stock e o despacho poderá ser feito de imediato.

Informações sobre o envio
1

3 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

3 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
Simple, future-proof
DylanK 02.04.2025
A basic but functional power distributor.

Positive:
- No attached power cable - setup is easier and cleaner.
- Compatible with PowerCon TRU1 in and through (not Neutrik hardware), which seems likely to be the industry standard for the foreseeable future.
- Angled outlets make it easy to fit straight and right-angle plugs in tight racks.
- Possibility to reverse the rack ears.

No major issues, but some missing nice-to-haves:
- LED to indicate presence of power.
- Power switch - not essential since TRU1 can be disconnected under load (i.e. it's safe to just pull the plug even without a switch) but it would sometimes be nice to power off this rack without powering off whatever is connected to the power through connector.
- The power in+through connection block is permanently attached; it's not possible to re-attach it the other way up. If you want the power connectors on the left-hand side of the rack, they will be upside down.
acabamento
0
0
Reportar a crítica

Reportar a crítica