Thon Rack Panel 1U Flat Air Vents

()

Mostrar tradução

Rack Panel 1U

19" rack format
With ventilation slots - flat
Robust quality

30 dias dinheiro de volta

Thomann garantie de 3 anos

número de artigo 124342
unidade de venda 1 peça(s)
Rack Units 1 U
Type 19"

€ 6,70

Todos os preços incl. IVA

Posição de vendas

em Chapas para racks

162 Avaliações de clientes

5 106 Clientes 4 43 Clientes 3 11 Clientes 2 0 Clientes 1 2 Clientes

4.5 / 5

acabamento

Diretrizes de apreciações

46 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Go with the (air)flow

The Professor 12.09.2018

One of these at the top of your rack, and another at the bottom, will help set up a little convection current of air running over the hot gear in the middle. Think of them as the venting panel bread in a hot gear sandwich. Since keeping your rack equipment cool prolongs its life and ensures its day-to-day reliability, and since fans and extractors are noisy, these little panels are very worthwhile.
Be aware that because most of the length of the panel is punched through with apertures, these aren't as sturdy as solid blanking panels; they bend more easily, and sometime have arrived a little warped. That said, it's a moment's work to gently bend them back; and once installed they look very neat and professional.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Economic and well built, an excellent way to provide ventilation to your above/below rack gear

Anónimo 26.02.2014

This panel is great at what it does. It is well built and very economical. I use one above and below my rack units, so as to provide additional ventilation and air-cooling around them. The panel seems to be made from steel and is slightly thinner than the aluminium rack panels that are usually found on the front of rack equipment. This means that it can be prone to flexing/bending if pushed in the middle when attached. Also, being slightly thinner means that it will sit slightly lower than the other front panels of your other rack gear -but at this price it would be very hard to complain about anything!