Para o conteúdo da página

Ape Labs Neon Stripe Controller PCBA

5.0 de 5 estrelas de 1 avaliações de clientes

Built-in controller for use with Ape Labs Neon Stripe rope light

  • Perfect for flush-mounted boxes and installation
  • Also works for commercially available LED strip products with 12-24 V
  • Control / operation: 4 4-group management via remote control and smartphone app or 4 DMX universes
  • Automatic signal repeater from lamp to lamp
  • Control via remote control (Art.522038 / 522045) and Ape Labs Connect (Art.522043 / 522044) (remote control and Connect not included)
  • DMX: 4 channel mode 8 bit, 7 channel mode 8 bit, 8 channel mode 16 bit
  • Wireless: 2.4 GHz (2,400 - 2,485 MHz)
  • max. 20 dBm ~ 100mW (EIRP
  • Power: V in 12-24 V DC V out 12-24VDC
  • max. 100 Watt
  • 100 watts of power corresponds to a maximum of 20 metres of Ape Labs Neon Stripe
  • RGBW (4 Channel LED Controller)
  • PCB plug with connecting terminals for LED strip and power supply included in the scope of delivery

Included in delivery:

  • Controller circuit board
  • Platinum plug with terminal contact for LED strip
  • PCB connector with terminal contact for power supply
  • Disponível desde Agosto 2024
  • número de artigo 596611
  • unidade de venda 1 peça(s)
  • Construction Type Controller
  • Colour Mixing RGBW
€ 42
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

1 Avaliações de clientes

5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

1 Crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MG
Lichtsteuerung easy selbst bauen
Michael G Booking Dj 19.11.2024
Man braucht nicht wirklich viel Können, um diesen Bausatz fertig zu stellen. Ich habe ein 150w Netzteil verbaut, um bis 20m oder mehr Lichtschlauch verbauen zu können bei Bedarf. Ich verwende es als Hintergundbeleuchtung für meine DJ Konsole.
acabamento
1
0
Reportar a crítica

Reportar a crítica