Para o conteúdo da página

Battery-operated LED colour tube with IR remote control

  • Beam angle: 300°
  • Milky plastic housing
  • With IR remote control (incl. battery)
  • LED: 32 x 5050W 3in1 TCL RGB
  • Adjustable effect speed
  • Electronic stepped dimmer
  • Stroboscope effect
  • 10 Integrated show programmes
  • Direct colour selection for 12 colours
  • Control: on/off switch on the device
  • Battery type: 1 x Lithium-Ion 10.8 V, 2500 mAh, 27 Wh
  • Battery operating time: max. 8 hours
  • Charging time: 4 hours
  • Power supply: 12.6 W DC
  • Protection class: IP20 (for indoor use only)
  • Protection class: SK II
  • Power connection: BArrel connector (M) Power connection cable with plug-in power supply unit
  • Dimensions (W x H x D): 20 x 100 x 5mm
  • Weight: 560 g
  • Includes power supply unit, stand, IR remote control and mounting brackets
Disponível desde Novembro 2023
número de artigo 579577
unidade de venda 1 peça(s)
Type Tube
battery powered Yes
Construction Type LED Tube
Number of LEDs 32
Colour mixing RGB
LED Type SMD
Floor housing 1
Fanless 1
remote control Included
Housing Colour White
Battery life 8
Mostrar mais
€ 66
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

12 Avaliações de clientes

4.4 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

saída de luz

acabamento

10 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
JT
Very cost effective
Jack Thorne 12.03.2024
Bought 6 items. Battery lasts 24h+, more than promised (tested with blue light). On/off button needs redesign, too big an sensitive. Needs also better pink color. One or two auto programs were not able to sync between 6 units because 1 unit had been programmed with different color sequence start. Most will probaby use just color option and not use auto at all, but they aren't bad also. Main colors are very bright (RED, Green) but bluish are also nice, almost neon and darkest blue provides a little bit UV ( test in complete darkness ). Ability to change speed is good. Light output pretty good, small rooms get nice ambient light. They are very light, packed 6 into special carrying case and it doesn't weigh at all. I had problems with different light outputs out of the box for two units, but they disappeared after I played with auto programs, and fully recharged them. I wish legs were black, so I'll repaint them. I've been using also Astera AX1 tubes, and for some events I'll be now using these tubes, as Astera cases are very heavy. These are way better than ADJ's. Will probably order extra 6x.
saída de luz
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
D
Licht van materiaal maar lange batterijduur
DJ-MC1 16.07.2024
Mooie led tubes wel wat goedkoop plastic materiaal zeker de voetjes mochten aluminium zijn eerlijk gezegd.
Verder werking perfect geeft een mooie licht voor bij de DJ booth.
Batterijduur gaat geel langer mee dan 8 uur
Meer moet ik er niet over zeggen .
Kwalitatief goed product.
saída de luz
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
t
Geniusen
thorehl 12.03.2025
What a great fixture. Easy to use, easy to setup, awesome output. Generally this is a bright fixture, being a white tube, everything emitted comes of as bright and light. There are no dark colors if that's what your looking for.
Side note, the on/off switch is stupidly set up as it will with ease be pressed during transport and or storage in the softbag that comes with the bundle. Using 1 leg to protect the switch so it doesn't get pressed and run out of power.
That said, a little 3D printer voodoo, and your good to go.
Clients love these things
saída de luz
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
L
super light, easy to use
LukaskoM 20.08.2024
Nice effect, although one of the light has different temperature than the rest of them.
saída de luz
acabamento
0
0
Reportar a crítica

Reportar a crítica