Para o conteúdo da página

Machine Head Set for Electric Guitar

  • Vintage F-Style
  • Configuration: 6 Right
  • Semi-closed construction
  • Buttons: Butter Bean, metal
  • Gear ratio: 1:15
  • Shaft length (to string hole): 21.6 mm
  • Bore: 8.8 mm
  • Attachment: Screw
  • Screw tab angle: 90°, 180°
  • Surface: Nickel
  • Includes fastening screws and push-in sleeves for 8.8 mm holes
  • Made in Japan
  • Disponível desde Maio 2020
  • número de artigo 476947
  • unidade de venda 1 peça(s)
  • Colour Nickel
  • Locking No
  • Design Vintage
€ 39
Todos os preços incl. IVA
Em stock
1

14 Avaliações de clientes

4.6 / 5

acabamento

12 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
p
Wrong way round
pompeiiswords 01.04.2024
I searched for these by the part number not name/handing, so ended up with the R with are actually for a left handed guitar. Fortunately with a few hand tools, they can be swapped around for a right handed guitar ;-)
acabamento
1
5
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
S
Thanks Thomann
Stu-SAFC 06.05.2025
Unfortunately my TE-62DB was damaged in shipping and one of the machine heads was bent. Thomann were fantastic and sent a set of Gotoh tuners to replace the damaged one! Fantastic tuners and they fitted in the factory holes! Thanks again
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
The best vIntage tuners for me
Andrew822 24.12.2025
All Gotoh parts are great and these are no exception - I really like them they are always the same quality. They even come with a little bar punch for tapping in the ferrules or even to remove old ones. The usual Japan quality all round I love them and so will you.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate de
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
L
Guter Ersatz für harley benton tuner (zb JA-60)
Lars9 27.08.2025
Vorab sei gesagt das gebohrt werden muss! Die können nicht eins zu eins getauscht werden. Ich habe persönlich mit einem 8,5mm Bohrer die Löcher größer gemacht (die alten Hülsen lassen sich sehr leicht mit einem Schlitzschraubendreher und einem Hammer entfernen, aber bei den gotoh Mechaniken liegt ein Tool dafür bei, hab ich aber erst gesehen nachdem ich fertig war 😆🙈. Ich weiß nicht wie eng genau das sein muss, vllt hätte man auch einen 9mm Bohrer nehmen können, ich hab pi mal Auge gearbeitet 😉. Seit vorsichtig beim einschlagen oder pressen der gotoh Hülsen, ich depp hab mit bei der Mechanik der hohen e-Saite die Kopfplatte angerissen. Funktion ist aber noch gegeben 😆. Die Mechaniken selber auf der Kopfplattenrückseite sind quasi identisch, dh die Schraubenlöcher der Befestigung passen einwandfrei.

Die Mechaniken sind definitiv ein Upgrade, kann ich nur empfehlen.
acabamento
0
0
Reportar a crítica

Reportar a crítica