Rean NYS 207

()

Iniciar 360°

Mostrar tradução

Jack

2 Pole
Right angle
Height: 6.35 mm
Max. Cable diameter: 6 mm
Metal housing and plastic kink protection
Made by Rean (registered Trademark of Neutrik AG)

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Fevereiro 2008
número de artigo 201815
unidade de venda 1 peça(s)
Installation No
Mono/Stereo Mono
Angled Yes
Type TS (mono/unsym.)
Plug Jack 6,3 mm TS male angled

Mostrar variações deste produto

513

Rean NYS 207

Rean NYS 207 Jack * 2 Pole * Right angle * Height: 6.35 mm * Max. Cable diameter: 6 mm * Metal housing and plastic kink ...

€ 1,30

Para o artigo

275

Rean NYS 202

Rean NYS 202 Jack Plug * 6.3 mm Jack * Stereo plug * Chrome-plated * Max cable diameter: 6 mm * Made by Rean (Registered...

€ 1,62

Para o artigo

313

Rean NYS 201

Rean NYS 201 Connectors * Jack mono * For cable with diameter of up to 6 mm * Made by Neutrik (Rean)...

€ 1,22

Para o artigo

284

Rean NYS 208

Rean NYS 208 Jack Plug * 6.35 mm, angled * 3-pin * Maximum cable diameter: 6 mm * Metal housing and plastic collet for k...

€ 1,72

Para o artigo

Rean NYS 204

Rean NYS 204 Jack Plug * 6.3 mm * Stereo * Black plastic handle with flexible strain relief * For cables with diameter o...

€ 1,22

Para o artigo

€ 1,30

Todos os preços incl. IVA

Desconto de quantidade

Preço unitário	Poupará	Montante
€ 1,30		1
€ 1,25	3,9%	50
€ 1,15	11,5%	100

Posição de vendas

em Fichas Jack de 6,3mm (macho e fêmea)

Eis o que compraram os clientes que visualizaram este artigo

31%

comprado

Este artigo exatamente

Thomann SK140 Jack mono Angled

513 Avaliações de clientes

5 319 Clientes 4 149 Clientes 3 33 Clientes 2 9 Clientes 1 3 Clientes

4.5 / 5

acabamento

Diretrizes de apreciações

185 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Buy this if You need angle connector 6.3mm

Alexandr Mardari 11.05.2021

Buy this if You need angle connector 6.3mm.
I used such designed angled connector named with different brands.
It was always good, never broken. It looks not beautiful, but it is more sturdy than every another design connector in compare. Just does it job well and fits from thin to thick cables. I always use many circles of duct tape above cable attachment point using thin cables, after it is impossible to break the junction.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Solid angled plug.

Mofosir 11.02.2025

While not as secure as a Neutrik, nor as slim, it does have it's advantages, precisely in it's size - it can easily accommodate a cable that's around 8mm. I've used this with the Cordial CGK Road 75 and it's almost too loose with it, and it's ~7.2mm, and I've used it with a recycled MXR Pro series cable that measures at 8.2mm, and it fits perfectly, The soldering area is ample and solder sticks to it well. The clamping mechanism is very simple, and though it is relatively sturdy, I'd avoid yanking the cable by itself but rather holding onto the plug. Overall - absolutely solid. If You need to fit a chonky cable and don't want to shell out for full blown neutriks it's a no-brainer, do recommend!

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Neutrik Quality made in China

Anónimo 21.07.2014

I have used these plugs for several years now, soldering my own cables for my effects board and making instrument cables. The quality of these plugs is absolutely outstanding for this cheap price. I can hear or see no difference between these plugs and more expensive ones.

The only tricky part is soldering the mass contact to the plug, but with a little bit of excercise (probably after two or three cables), you will do just fine and have good, long lasting plugs for your instruments and effects for barely one euro.

You have to be careful though when using these plugs directly into your amplifier, because of the angled jack it sometims blocks other inputs (for example on my Laney IRT Studio)

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Anónimo 11.06.2015

Very high quality for a cheap plug. Also very easy to solder, does not need a large amount of heat. The plastic looks weak, but it actualy is not. I have soldered on hundreds of them already onto the cables I make with no complaints. They easily over-last the cables they are soldered on. Highly recommended!!!

Reportar a crítica

Ler todas as reviews

Rean NYS 207

Jack

Eis o que compraram os clientes que visualizaram este artigo

513 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

185 Críticas

Navegador inteligente

Servido com amor!

Rean NYS 207

Jack

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

513 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

185 Críticas

Comparar opções

Navegador inteligente