ObsidianWire T 3-Way Universal Harness

Iniciar 360°

Mostrar tradução

Solderless Electronics Replacement Set for Electric Guitar

For T-style electric guitars with humbucker
4 Optimised modes: HH, HS, SH & SS
Intelligent circuit: 500 kOhm for humbucker and 250 kOhm for single coil
Treble bleed prevents treble loss at low volume control settings
Controls: Volume, tone
Switch positions: 1: bridge, 2: bridge & neck, 3: neck
With the highest quality components for a significant improvement over standard electronics
Made in New Zealand

Delivery contents:

Volume control: 1 x CTS 500/250 kOhm, logarithmic, fine grooved split shaft (24 spline for US guitars & potentiometers)
Tone control: 1 x CTS 250 kOhm, logarithmic, finely grooved split shaft (24 Spline for US guitars & potentiometers)
Capacitors: 150 series polyester 0.022µF
Switch: Oak Grigsby 3-way switch
Jack socket: 6.3 mm mono

Disponível desde Janeiro 2024
número de artigo 580493
unidade de venda 1 peça(s)
Design Normal
Resistance Value 500/250 kOhm
Characteristic Curve Logarithmic
Thread Length in mm 9,5 mm
Tandem Poti No
Push/Push No
Solderless Yes
shaft type grooved
Type Switcher
Colour Silver

€ 115

Todos os preços incl. IVA

Posição de vendas

em Potenciómetro

Eis o que compraram os clientes que visualizaram este artigo

28%

comprado

Este artigo exatamente

€ 115

14%

comprado

ObsidianWire T 3-Way Vintage Harness

€ 105

comprado

ObsidianWire T 3-Way Universal Spl. Harness

€ 129

comprado

Allparts CTS 250K 9,5 Spl Aud.Taper Pot

€ 9,90

comprado

ObsidianWire T 4-Way Custom Harness

€ 109

14 Avaliações de clientes

5 12 Clientes 4 2 Clientes 3 0 Clientes 2 0 Clientes 1 0 Clientes

4.9 / 5

acabamento

Diretrizes de apreciações

10 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Recommended if you don't like soldering

mutaatio 01.01.2025

I'm not a fan of soldering so I decided to give this solderless harness a try in my new partscaster. It's a very crafty design, there is a small dial which you can use to set the desired resistance for each of the pickups separately, either 250K (single coil) or 500K (humbucker).

Instructions were quite simple, but after I assembled everything I got no sound. I checked every connection with multimeter and disconnected and reconnected everything. It took a while to find the problem: the output jack connector is very tight and there is a step before the input jack is in place. I thought I had the cable connected because of this, but in fact it was only in the first step and I had to push it ever further down.

Aside from the unusual input jack design, my only complaint is the quality of the quick connector for the pickup wires. It doesn't feel too sturdy and if you try out new pickups often, it might not last very long. The switch also has a bit of play in the lever, but works well enough.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

If you’re looking for flexibility…

Kokkaya 09.06.2024

This is the harness for you.
I wrote a rather neutral review for Obsidianwire earlier this year (for single cut harness) because of too soft of pots and mediocre 3 way toggle switch.
This time they nailed it. The cap is 0.22nF, which I like a lot for single coils and not many suppliers provide S or T type harnesses with 0.22. Plus, you can go 500K or 250K with pots. You can even assign 250 and 500 to different pickups thanks to the clever circuit. This is a very flexible and usable harness. Switch, output jack and solderless terminal are of good quality.
Important points that are not mentioned in the product description:
The pots are split shaft but solid shaft ferrules are included in the package! Which is a very good thing as you can use your screwed in standard tele knobs.
And switch screws are also included in the package. This is a huge bonus again. Switch tip was included in the single cut harness but is not included this time.
Overall, I like this purchase. Many thanks Thomann for carrying all this kinds of stuff.

Reportar a crítica

Ler todas as reviews

ObsidianWire T 3-Way Universal Harness

Solderless Electronics Replacement Set for Electric Guitar

Eis o que compraram os clientes que visualizaram este artigo

14 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

10 Críticas

Navegador inteligente

Servido com amor!

ObsidianWire T 3-Way Universal Harness

Solderless Electronics Replacement Set for Electric Guitar

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

14 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

10 Críticas

Comparar opções

Navegador inteligente