Tama CB90FH Felt Beater Head

()

Mostrar tradução

Beater Head

For Iron Cobra bass drum pedals
Surface: Felt

Disponível desde Fevereiro 2001
número de artigo 146286
unidade de venda 1 peça(s)
Type Beater

€ 18,30

Todos os preços incl. IVA

Posição de vendas

em Acessórios para Pedais

Eis o que compraram os clientes que visualizaram este artigo

51%

comprado

Este artigo exatamente

€ 18,30

13%

comprado

Tama CB90F Felt Beater

€ 26

comprado

Tama CB90RH Rubber Beater Head

€ 18,30

comprado

Tama CB900PS Power-Strike Beater

€ 28

comprado

Tama HP900-7H Heavy Tension Spring

€ 4,55

125 Avaliações de clientes

5 84 Clientes 4 30 Clientes 3 6 Clientes 2 3 Clientes 1 2 Clientes

4.5 / 5

acabamento

Diretrizes de apreciações

32 Críticas

Qualidade top

GoncaloP 29.01.2025

Batente perfeito para o Iron Cobra.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Perfect beater for my purpose

Johan SpinOff 28.12.2019

I bought this as a replacement beater head for my Tama Speedcobra. The beater head that was supplied with it was too hard for my taste.

With this beater head attached my kick drum just sounds the way I want it.
It's a very easy replacement. Angle can be adjusted, ... It packs more features than I would ever have expected this kind of product could have or need!

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Simple replacement for worn-out Iron Cobra beater heads.

jonathanhoey 23.06.2014

I bought a pair of these beater heads to replace the worn-out original beater heads that came with my Iron Cobras. (I had played almost 100 gigs with them, as well as hundreds of hours of rehearsals, so I have nothing bad to say about their longevity!)

Fitting them is very straightforward, requiring only a drum key. Loosen the single bolt, turn the head through 180 degrees (so the felt side faces the back) and lift off. Pop the new one on (also upside down and backwards), rotate until it faces the front, and tighten the bolt. It takes seconds.

Note that this package does not include the shafts - this item is the beater *head* only. So it's only suitable as a replacement if you already have Iron Cobra beaters with the cylindrical T-bar at the top. If you're replacing a different model of beater, then the item you need is the CB90F, which includes the shaft.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

The felt does ware away

Anónimo 17.09.2015

This is a great beater head, and is the beater head of my choice, as it feels great to play with, gives a good response from my pedal and a nice sound from the bass drum. I have never had any trouble with the connection of this beater head, it fits to my iron cobra pedal as it should and has never fallen out of place.
The only trouble i have found with this beater head, is only to be expected, but I am now finding myself having to replace the head only after a short amount of time, as the felt wares away sometimes leaving sharp bits of glue that then can damage the bass drum head, if it is not changed in time.

Reportar a crítica

Ler todas as reviews

Tama CB90FH Felt Beater Head

Beater Head

Eis o que compraram os clientes que visualizaram este artigo

125 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

32 Críticas

Navegador inteligente

Servido com amor!

Tama CB90FH Felt Beater Head

Beater Head

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

125 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

32 Críticas

Comparar opções

Navegador inteligente