I don't want to ramble. I purchased this guitar, one of HB's most expensive, expecting to have to fine-tune it. I'm skilled at doing my own set-ups, geometry, etc. I didn't expect a perfect guitar at this price point. I expected some finish issues, fret issues, tuner issues, possible pickup issues. Here's what I found when it arrived, most important to least, (at least for me):
1) I love the stainless frets and they were polished/finished pretty good except for 2 or 3 frets. They had obvious tool marks on the frets that caught the strings. I had to clean them up and polish them. While I was at it, I did some additional buffing on all the frets since I was already working on it. If not for those two frets or 3 frets, it would have been nearly ready to go.
2) Output balance was off between pickups. I assumed one of the pickups was bad and had planned on replacing them anyway. I put a pair of Gibson '57 Classic's in it, (two-wire, so the wiring was pretty much drop-in), but the neck put out nearly twice the power of the bridge pickup. It was odd. I had the the neck pickup below the surface and the bridge almost touching the strings and they still weren't balanced. "
Long story short, I did a complete rewire using standard H-H wiring with one toggle switch and everything balanced out and the TONE changed. I honestly don't know if they were drunk when they wired it or what but rewiring it turned into the guitar I expected!
3) I don't like, "Kluson" tuners, period. But, I figured, if I have to live with them, then I'm putting good ones on it. I installed Grover vintage-style, "Deluxe" tuners, simply because the gear ratio was higher. Did it matter? Not too much. The stock tuners were about the same.
Finish-wise, I only found one issue and it was hard to spot. When the light is shining just right on the neck, there's a fine line that runs from the back of the nut to the edge of the fingerboard, at a diagonal. It's just a finish crack and it took me a while to find it.
I would have given this 5 stars for sound if it had been wired correctly but I couldn't find a wiring diagram online that matched this mess. And when I rewired it to a more conventional H-H wiring, everything worked!
It was well worth the work and effort. I wouldn't change a thing. It's now my #1!
