Kramer PA-240Z 240W Power Amplifier

Iniciar 360°

Power Amplifier

1 x 240 W @ 70 V / 100 V
2 x 120 W @ 4 / 8 Ohm
With balanced and unbalanced inputs and line level output
2 Inputs with individual reinforcement
Each output supports independent input mixing with master volume, 3-band parametric EQ and selectable high-pass filter
Controllable via RS-232 and IP
Integrated DSP
Incl. power cable

Technical data:

Inputs: 1 x unbalanced stereo with 3.5 mm jack, 1 x balanced stereo +4 dBu/10 kO with 5-pole terminal block
Outputs: 1 x balanced stereo line level with 5-pole terminal block, 1 x stereo or 1 x mono speaker output with 4-pole large terminal block
Input sensitivity: Reaches full power at 0.3 V (-10 dBV)
Output power: 2x 120 W @4 ohms or 8 ohms or 1 x 240 W @70 V or 100 V
Amplifier type: Class D
Max. voltage gain: 26 dB SE/32 dB BTL
Dynamic range: 119 dB
Frequency range: 20 to 20000 Hz @ +/-1 dB
Signal to noise ratio: 80 dB - 10 dBV, 20 to 20,000 Hz
Control: Screw trimmer as gain attenuator
IP and RS-232
Audio THD+noise: 0.003 % (1,000 Hz @ 1 W)
Audio 2 harmonic: 0.08 % @75 W RMS @ 4 ohms, 6670 Hz
Power supply: Universal mains 85 to 265 VAC (full power at 120 to 230 V)
Overall efficiency: 89.5 %.
Dimensions: 21.5 x 16.3 x 4.4 cm
Weight: 0.9 kg

Disponível desde Janeiro 2022

número de artigo 529006

unidade de venda 1 peça(s)

Channels 2

Output power at 100 V 240 W

Output power at 4 Ohms / Cannel 120 W

Rack Units 1 U

DSP/Frequency Yes

Convection cooling No

Class Class D

Input 6,3 mm Jack unsym. Yes

Link Out No

Output Speaker Twist Yes

Output Phönix clamps Yes

Temperature controlled fan Yes

Width 215 mm

Depth 163 mm

Height 44 mm

Weight 0,9 kg

Mostrar mais