Para o conteúdo da página

8-Channel Installation Amplifier

  • Power: 8x 130 W @ 4 Ohm / 8x 70 W @ 8 Ohm (RMS)
  • Class-D amplifier
  • Frequency response: 20 - 20,000 Hz
  • Input impedance: 20 kOhm balanced / 10 kOhm unbalanced
  • perfect for installations like multi-zone applications
  • Safety circuits like thermal, short-circuit, power on/off muting
  • Limiter
  • Euroblock input and output
  • Volume control on rear panel and power switch on rear panel
  • Signal, clip, protection and power LEDs
  • Dimensions (W x D x H): 483 x x360 x 44 mm
  • 1U Rack 19" size
  • Weight: 6.6kg
  • Disponível desde Julho 2023
  • número de artigo 551992
  • unidade de venda 1 peça(s)
  • Channels 8
  • Output power at 100 V 0 W
  • Output power at 4 Ohms / Cannel 130 W
  • Rack Units 1 U
  • DSP/Frequency No
  • Convection cooling No
  • Width in mm 483 mm
  • Depth in mm 360 mm
  • Height in mm 44 mm
  • Weight 6,6 kg
  • Power (4 Ohms) per Channel 130 W
  • Class Class D
  • Amp Class Class D
  • Link Out No
  • Temperature controlled fan Yes
  • Output Phönix clamps Yes
  • Width 483 mm
  • Input Phönix clamp Yes
  • Depth 360 mm
  • Height 44 mm
B-Stock from € 439 disponível
€ 555
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

2 Avaliações de clientes

4.5 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

som

acabamento

2 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Pt
Hard to beat at this price
Paco the builder 30.04.2025
The amp is of a very good build quality.

Fans are inside the chassis and at an angle, probably larger than ~40mm diameter that would fit vertically. This is good. When the amp is idle, they're ignorable. Under regular load they are not disturbing.

The connectors on the back are well laid out and convenient.
Props for including a batch of Euroblock connectors in the package.
To make experience even better, I'd love to see a spare pack.

The LED displays on the front are sufficient.

This amp apparently has a soft start and stop no pops sent on turning on and off. Wow!

Now the drawbacks:
1/ The gain pots at the rear are what they are. Sufficient for general application, but setting up gains with 0.1V precision is quite a challenge. This could be improved.

2/ The amp is a little bit noisy (speced at 95db) - would not be an issue in commercial listening (clubs, retail, restaurants etc…_), but for pro audio art installation applications — well, it's far from the RME or other high end studio equipment standards. This could be improved.

Did not test the real power output under full 8-ch load yet.

In general, this is hard to beat at this pricepoint, as there are not many to choose from and prices are usually much higher.
características
manuseio
som
acabamento
0
0
Reportar a crítica

Reportar a crítica