the t.amp Quadro 500 DSP

()

Iniciar 360°

Mostrar tradução

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Setembro 2018
número de artigo 438086
unidade de venda 1 peça(s)
Power (4 Ohms) per Channel 500 W
Channels 4
Rack Units 1 U
Amp Class Class D
2 Ohm stable No
DSP/Crossover Yes
Convection cooling No
Width 483 mm
Depth in mm 460 mm
Height 44 mm
Weight 8 kg
Bridged Mode Yes
Temperature controlled fan Yes
Input XLR Yes
Jack Input 6,3 sym. Yes
Link Out No
Output Speaker Twist Yes

€ 585

Todos os preços incl. IVA

Posição de vendas

em Amplificadores

Bundles & ofertas

the box pro Achat Quadro Acoustic Set

€ 1.555

the box pro Achat 108CX/112Sub Quadro Set

€ 1.739

the box pro Achat 110/112 Quadro Set

€ 1.799

the box pro Achat 404/112 Quadro Gala Set

€ 2.075

the box pro Achat 804/112 Quadro Gala Set

€ 2.222

Eis o que compraram os clientes que visualizaram este artigo

100 Avaliações de clientes

5 67 Clientes 4 22 Clientes 3 5 Clientes 2 2 Clientes 1 4 Clientes

4.5 / 5

manuseio

características

som

acabamento

Diretrizes de apreciações

77 Críticas

Problems

Anónimo 11.07.2022

This amplifier is really good...........when it works. In four units buyed along a few months two of them had problems: one with the fans and input A and the other simply mutes one or two outputs at a time or simultaenously
Quality control is inexistent and service will take TWO MONTHS to delivery a new unit. As noticed for a prefessional this is simply unacceptable
Good products , when they work, low prices, but zero service and poor quality control

manuseio

características

som

acabamento

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Wasn't sure, but...!!

Adeler 20.05.2019

I ordered this amplifier because i have a 2 way system at home.
I was very unsure, but it turned out that the amplifier was very good.

Sound quality is great! Nothing to say about it! It's class D. No coloring of the sound as far as i am concerned

What i was unsure about was the ratings, it dosesn't say much about load/ohm/watt at what THD.
I have measured it to deliver 4x640w @ 4 ohms @ 1% THD so i am quite happy!

Also, i was exited to find out about noise from the fans. I can't hear them, really. There are two temperature controlled 80mm fans placed at an angle inside, pulling air from front and side and pushes it out on right side.

It's easy to use! Both the software and the on board controller works really great to set up, load, save and adjust presets and settings.

I REALLY recommends this amplifier, especialy for home use (Example; home teatre/home cinema, multi way setups and sub arrays)

I don't know if there are any amplifiers that can compare with this one for the price, and maybe even even more expensive amplifiers.

manuseio

características

som

acabamento

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Perfect amp for creating an 8-way monitor mix!

heyimdan-dan 09.06.2021

I bought two Quadro 500 DSP power amps to ditch four very heavy amplifiers that were taking up 8U of rack space. I was unsure about how well these amps would perform, but after getting them hooked up to my wedges (250w 8ohm speakers) there was little doubt that I'd retain all the power I had before and make a lighter rack case.

The main attraction meant I could have a single rack that connected the two amps directly to my Midas DL32 stage box, with all the speaker DSP in there too, making for a very compact and quick gig set up.

The interface is great and very straight forward with lots of features I'll likely never need, but it's great to know it's there. From within the menu you can pair up XLR inputs to XLR channels. For example, Input A will send the source to Output A and B. Sadly you can't currently send Input A to say Outputs ABC&D. That would be very handy for particular circumstances, especially since there aren't any XLR thru's to link channels. But some XLR splitter leads can navigate that issue. (EDIT: I have since worked out how to take the input from channel A and use it to drive all four speaker outputs)

Considering buying more to run my FOH high frequency drivers. (EDIT: I bought two more of these amps to run the HF drivers in my 16 box line array, with 8 boxes per side. Each HF driver is 16 ohms, and there are two in each cabinet. I use one speaker output channel to run 4 HF drivers, and with the volume level at -12db, so the amp is only outputting at about 60-70 watts and this is more than enough. The clarity is excellent and I can’t fault it.)

manuseio

características

som

acabamento

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

best choice for this price

Oliver Kocsis 30.01.2019

I use it in a church, to everyone's satisfaction, it was the best choice, I chose because of theintegrated DSP and delay, together with a Behringer xr16 (fixed install, no buttons, no faders= no problem with amateur sound guys). Crystal clear sound, good damping factor, simply and useful one button menu for configuration, all for a very good price. I am also pleased with the customer.

manuseio

características

som

acabamento

Reportar a crítica

Ler todas as reviews

the t.amp Quadro 500 DSP

4-Channel Digital Power Amplifier

Eis o que compraram os clientes que visualizaram este artigo

100 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

77 Críticas

Navegador inteligente

Servido com amor!

the t.amp Quadro 500 DSP

4-Channel Digital Power Amplifier

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

100 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

77 Críticas

Comparar opções

Navegador inteligente