Thon Case 8x LED PAR64 Short

()

Mostrar tradução

Custom-made Case

For 8 x Stairville LED PAR 64 short
Material: 7 mm Plywood
25 x 25 mm Aluminium edge
Min. 1 cm foam padding on the bottom
3 cm Convoluted foam in lid
2 Spring-loaded butterfly latches, medium
4 Folding handles
8 Compartments, each with the following dimensions: 27.7 x 27.7 x 39.7 cm
4 Steel ball corners on top
4 Stackable steel ball corners at the bottom
Exterior dimensions (W x D x H): approx. 1180 x 603 x 467 mm
Weight: approx. 23.0 kg
Colour: Phenol Brown
Made in Germany

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Dezembro 2009
número de artigo 239943
unidade de venda 1 peça(s)
Case category Headlight
Number of fixtures 8
Design of compartment Upholstered compartment
Material 7 mm Plywood
Wheels No
Locks And Catches 2x Butterfly

€ 257

Todos os preços incl. IVA

133

Posição de vendas

em Cases para Equipamento de Luz

Eis o que compraram os clientes que visualizaram este artigo

42%

comprado

Este artigo exatamente

€ 257

comprado

Flyht Pro CX Tour Case 4 Par64 Short

€ 199

comprado

Thon Case 8x LED PAR 56 Short

€ 246

comprado

Thon Case 6x LED PAR64 Short

€ 229

comprado

Flyht Pro Case Universal for 19" units

€ 88

121 Avaliações de clientes

5 69 Clientes 4 42 Clientes 3 8 Clientes 2 2 Clientes 1 0 Clientes

4.5 / 5

estabilidade

manuseio

acabamento

Diretrizes de apreciações

43 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Thon Case 8x LED PAR64 Short

StephenF 26.12.2014

I have been looking for a case to transport long Par 56 cans and Par64 LED's for some time. All the cases I have looked at are just a touch to small for the large Par 56 can's. I decided to try this case from Thomann, it looked as if it may just be large enough to take the cans, which it does with ease.
The inside base of the case is lined with a protective foam, so the cans can sit nicely protected and stable. The devisions make sure all 8 of the cans do not fall over in transport and get damaged.
Quality of the build is good, if a little flimsy. I noted that the dividers may need to have small brackets added to stiffen up the top sections. The 7mm plywood has a laminated brown finish which looks as if it will stand up to a little abuse.
Overall Thormann has come up with a good compromise between build quality and finished weight. Using a thicker plywood would have made the case much stiffer but added a lot of weight.
As this is a fairly big case I was surprised that I could lift it (all be it empty) out of it's packing box. When loaded with the lights it is still manageable, and the handles make it easy to move around and load. I decided not to fit wheels, as these would make stacking the case much harder, instead I use a trolly board if I need to move the case over long distances.
All the fittings are nicely cut into the plywood and all the rivets finished off well. I liked the way the quality ball corners will help the case stack in storage.
I have already decided to buy more of these cases to protect and transport my other sound and lighting gear.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Basic enough but does the job

Gerry5992 01.01.2019

First thing i would say is buy 4 castors (wheels) for this or you will die lifting it.
I have about 10 of these all at least 3 years old and all still ok.
It?s a cheap case for the money but it?s all down to how you handle it.
All of mine are still in perfect order. I use them for cans and also my arri lights fit in with a g clamp on so that?s a bonus

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

A product that is great, but room for improvement.

Anónimo 14.10.2016

I have two of these cases which i use to store LED cans. In one I can fit 8x Par64 LED cans + short DMX and power cables, in the other i use it to hold 24x Cameo 7x9w Flat LED par cans + 24 wooden floor stands/bases.

A bit too bulky and heavy (once filled) to capacity (or beyond) - wish it had wheels. Case is also liable to twisting and torsion. As such bigger butterfly catches could have been fitted.

The plus side is that they have been touring now for 2+ years with no damage to the case or significant corrosion to metalwork.

The case is very spacey!

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Good quality flight case for parcan

Jinu 10.06.2015

Its a very good quality flight case for the par cans. Unfortunately its missing the wheels. With wheels its a perfect choice. Planning to buy one more for out other set of parcans.

Reportar a crítica

Ler todas as reviews

Thon Case 8x LED PAR64 Short

Custom-made Case

Eis o que compraram os clientes que visualizaram este artigo

121 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

43 Críticas

Navegador inteligente

Servido com amor!

Thon Case 8x LED PAR64 Short

Custom-made Case

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

121 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

43 Críticas

Comparar opções

Navegador inteligente