Para o conteúdo da página

Digital Class D Amplifier

  • Power: 4x 600 W/4 Ohm, 4x 360 W/8 Ohm (RMS)
  • Bridge mode: 2x 1200 W/8 Ohm (RMS)
  • Inputs: 4x XLR (bridge and stereo mode selectable)
  • Protective devices: Short-circuit, overheat, mute on power-up and power-down, DC voltage protection and RF protection
  • LED indicator (signal, limit, protection)
  • 19'' Steel housing
  • Dimensions (W x H x D): 483 x 44 x 390 mm
  • Weight: 6.4 kg
  • Colour: Black
  • Disponível desde Maio 2023
  • número de artigo 567133
  • unidade de venda 1 peça(s)
  • Power (4 Ohms) per Channel 600 W
  • Channels 4
  • Rack Units 1 U
  • Amp Class Class D
  • 2 Ohm stable No
  • DSP/Crossover No
  • Convection cooling No
  • Width in mm 483 mm
  • Depth in mm 390 mm
  • Height in mm 44 mm
  • Weight 6,4 kg
  • Bridged Mode Yes
  • Temperature controlled fan Yes
  • Input XLR Yes
  • Parallel Input Yes
  • Link Out XLR
  • Output Speaker Twist Yes
B-Stock from € 419 disponível
€ 489
Todos os preços incl. IVA
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
1

1 Avaliações de clientes

2 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

som

acabamento

1 Crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
BS
Good potential, let down by design flaw
Barry Sausagechops 14.07.2025
This amp is a good price, light weight, small 1u form factor. I bought it to power a pair of mid tops with separate mid drivers and compression drivers, so needed four channels in one box

Unfortunately there's a problem - unacceptably high levels of crosstalk between channels. If I connect a source to input 1 and a driver to output 2, I hear the signal from in 1 on out 2 (and 3 and 4)

I can't send LF content to my mid drivers and have those low frequencies also going to the comp drivers. They'll be damaged. So the crosstalk prevents the amp working for me.

For the record : I bought the same amp twice from two different suppliers. Both behaved the same. So it looks like a design flaw, not a one-off fault.
manuseio
características
som
acabamento
0
0
Reportar a crítica

Reportar a crítica