SE Electronics DM1

Iniciar 360°

Mostrar tradução

Active Inline Preamp

+28 dB gain
Perfect for ribbon or dynamic microphones with low output
Class-A FET transistors
Low inherent noise
Enables long cable runs and reduces susceptibility to HF interference
Gold-plated XLR contacts
Sturdy metal housing

Note: Requires 48 V phantom power.

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Março 2019
número de artigo 462124
unidade de venda 1 peça(s)
Channels 1
Number of microphone inputs 1
Instrument input No
Tubes No
Compressor/Limiter No
Equalizer No
De-Esser No
Phantom power No
Phase Reverse No
External effect loops No
Analogue Outputs XLR
Digitale Outputs None
Headphone connection No
Level Meter No
Design Desktop

€ 108

Todos os preços incl. IVA

101

Posição de vendas

em Pré-amplificadores

71 Avaliações de clientes

5 59 Clientes 4 9 Clientes 3 3 Clientes 2 0 Clientes 1 0 Clientes

4.8 / 5

manuseio

características

som

acabamento

Diretrizes de apreciações

37 Críticas

Som perfeito e super pratico

Leeleo 17.07.2021

pequeno. perfeito para transportar e o som e bom. eu gosto mais deste do que do cloudlifter.

o som e ligeiramente diferente, mas quase que nem se nota a diferenca.

manuseio

características

som

acabamento

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Does the job, but not quietly. Don't recommend.

preampreviewer 19.02.2022

Well, it looks amazing, and is cheaper than a cloudlifter, so that's good.

If you need something inline to boost your mics, this will do the job, but in my experience, it picks up A LOT of noise. Maybe I'm doing something wrong, but the connection between the mic (Shure sm7b) and xlr never felt super tight, and this led to a lot of unwanted noise in my recordings.

Not all the time, mind you, but that's the problem. It is inconsistent. Sometimes it does the job exactly as it should, and the recordings are clean. Sometimes it picks up all kinds of noise, and these bleed into the recordings. It happens at random, and I've never been able to isolate what causes it.

SO, for this reason, I do not recommend this product. It just isn't consistent and clean enough.

I wound up replacing it with a triton fethed, and the difference is night and day. Connection is super tight, sound quality is amazing, and 100% clean. Pluse, the triton fethed is about 40eur cheaper, and about 25% smaller. So, I'd recommend going for the fethed for your gain needs!

manuseio

características

som

acabamento

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Making music fun again

Kwade 06.01.2022

It's an inline preamp. It's not supposed to be more than an almost invisible extension to mic's needing a bit of help. It does this excellently, as most tend to do, but it's also fun, and there's something to be said for that. It comes packaged like a stick of dynamite, is deep red and says dynamite on it. It makes you smile, and I don't know any other inline preamps that do that. I'll support a brand for that reason alone.

manuseio

características

som

acabamento

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Bang for you buck..

Tom Cross 19.04.2019

After some research online I found this to be a very reasonably priced mic activator/ preamp which would allow me to use my SM7B and Ribbon mics to their full potential.. Thomann kindly stocked it and I placed my order. First impressions this is a very cool looking device. It comes in a small box that looks like a stick of dynamite stick so I'm surprised it made it through airport security :) It is connected directly to your microphone and uses 48v from your preamp to power. It delivers 28db of clean gain so you no longer have to crank your preamp when recording quieter sources.. It will not pass 48v on to your ribbon so it's completely safe to use with them.. I've also used it to join up long cable runs with great sucess. Would definitely recommend this to anyone who's looking for a cheaper alternative to cloudlifter / fethead and from the reviews I've watched online it performs better at a fraction of the price.. A++

manuseio

características

som

acabamento

Reportar a crítica

Ler todas as reviews

SE Electronics DM1

Active Inline Preamp

71 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

37 Críticas

Navegador inteligente

Servido com amor!

SE Electronics DM1

Active Inline Preamp

Acessórios e artigos correspondentes

71 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

37 Críticas

Comparar opções

Navegador inteligente